DEFENDER2.NET - View topic - Diff Crown Wheel Bolts

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Diff Crown Wheel Bolts

Page 1 of 1

Print this entire topic ·

kevinf

Member Since: 12 Apr 2011
Location: sheffield
Posts: 55

Diff Crown Wheel Bolts

Confused about which crown wheel bolts to use
After having my front diff destroy it's self trying to eat it's own crown wheel bolt I've sourced a good 2nd hand diff from an earlier Td5 and intend to fit new crown wheel bolts before fitting it and also plan to change the rear diff crown wheel bolts as a precaution, having already sourced the front crown wheel bolts from the local main dealer before I collected the diff
The main dealer couldn't identify wether I had a two or four pin diff in the rear but were adamant that the bolts were different between the two and four pin diffs even sent pictures showing the four pin diff c/w bolts
So I removed the rear diff to find the c/w bolts are identical to the original front diff c/w bolts but slightly different to the new bolts (bolt head slightly different), just to confuse things more the replacement diff has totally different c/w bolts (slightly longer and with separate washers)
Are the bolts interchangeable? Or am I banging my head against a brick wall

Cheers kevin

22nd Jul 2019 9:28pm

4RF RDS

Member Since: 19 Jul 2015
Location: Ottawa
Posts: 921

2000 Defender 110 Td5 XS CSW Epsom Green

I had my front do the same a few weeks ago. The bolts with a washer are the same as the ones with a pan head and serrations though those ones are best. Use loctite blue and a good torque wrench to set them. I was lucky and only had two gear teeth chipped so that diff is now my spare.

Good luck.

2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)

23rd Jul 2019 4:52pm

kevinf

Member Since: 12 Apr 2011
Location: sheffield
Posts: 55

Any idea of the torque setting for the bolts? Does 60NM sound right and is it the same for all types of bolt ?

Cheers kevin

23rd Jul 2019 7:20pm

4RF RDS

Member Since: 19 Jul 2015
Location: Ottawa
Posts: 921

58Nm for all crown gear bolts. Check out Utube there are some good vids there to assist you

Cheers KevinN 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)

23rd Jul 2019 7:24pm

kevinf

Member Since: 12 Apr 2011
Location: sheffield
Posts: 55

Thanks

23rd Jul 2019 7:56pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum