Home > Maintenance & Modifications > Central Locking. |
|
|
All Terrain Member Since: 22 May 2011 Location: Poole, Dorset Posts: 92 |
Any suggestions to this problem. My key fob activates the central locking and the alarm etc. but I can still open the driver's door as if the car were unlocked. All the other doors are locked and the alarm works. Guessing an issue with the actual locking mechanism?
|
||
22nd Jun 2011 9:37am |
|
double cab happy Member Since: 01 Jun 2009 Location: merseyside Posts: 573 |
got the same but its the rear o/s door, if you find the cause please post it, like wise i shall do the same.
|
||
22nd Jun 2011 11:14am |
|
x-isle Member Since: 26 May 2011 Location: Midlands Posts: 1327 |
Probably a broken wire inside the rubber trunking that links the door to the body work.
Common problem. When I bought mine, both rear doors were not locking. Craig Rogers 2007 Puma 110 XS 2011 Evoque Coupe Dynamic Lux www.craigrogers.photography |
||
22nd Jun 2011 11:27am |
|
spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4722 |
Yep had a non functioning locking door on mine and it turned out to be a broken wire.Another problem I had was caused by the following. If you do take off the door trim and look at the locking mechanism you will see a little white plastic unit which turns and activates connecting rods. The inside circular piece can be tight and will not swivel. I had to remove mine, remove the centre piece and run a circular file in the surrounding retaining piece. A little oil on reassembly and all was o.k. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
22nd Jun 2011 10:24pm |
|
double cab happy Member Since: 01 Jun 2009 Location: merseyside Posts: 573 |
cheers guys, thats a little job for the weekend then
|
||
23rd Jun 2011 10:37am |
|
All Terrain Member Since: 22 May 2011 Location: Poole, Dorset Posts: 92 |
Gents,
Thanks for the suggestions. My lock on the drivers door is moving but not fully so I assume it is mechanical as opposed to electrical. Are the studs that hold the door card on reusable or will i need to get new ones to refit it once I take it off and fix the problem? Cheers. |
||
23rd Jun 2011 1:57pm |
|
x-isle Member Since: 26 May 2011 Location: Midlands Posts: 1327 |
As long as you are careful pulling them off, you can usually reuse them. Craig Rogers
2007 Puma 110 XS 2011 Evoque Coupe Dynamic Lux www.craigrogers.photography |
||
23rd Jun 2011 2:08pm |
|
All Terrain Member Since: 22 May 2011 Location: Poole, Dorset Posts: 92 |
Found out that it is a mechanical issue causing the problem. I assume the mechanism is slightly worn preventing the central locking from locking the door. There is a rod that could be adjusted to lock it but there isn't enough thread on it to take up the slack. Rubbish description of the problem I know!
|
||
4th Jul 2011 7:43am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis