DEFENDER2.NET - View topic - New Ram Mount for defender dash

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > New Ram Mount for defender dash

Page 1 of 1

Print this entire topic ·

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

2002 Defender 110 Td5 Black LE Java Black

New Ram Mount for defender dash

So just received my new ram mount and replaced the centre dash top screw with it (td5)

Click image to enlarge

Click image to enlarge

I have a couple of questions/observations...

By memory I believe that the screw goes into a plastic plug insert so cannot take excessive tightening. I have tightened it up as much as I dare, but when I clamp on the ram mount and arm I have enough leverage to either tighten it some more or slacken it off. This logical problem had not dawned on me until I fitted it.

Also, the X grip rotates once my phone is fitted. I have found two solutions on line ( Velcro phone to centre of X grip or wrap elastic band between one arm and the centre) both of which are not very elegant solutions.

So, in conclusion, the defender ram mount is a good solution but not perfect, and has anybody got any less Heath Robinson solutions to preventing the X grip from rotating? 2002 110 td5

15th Apr 2019 6:57pm

Siwynne

Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

I have the same issue. I was quite disappointed when I realised this happened. Watching with interest

15th Apr 2019 7:03pm

newton-tony

Member Since: 18 Sep 2016
Location: Wiltshire
Posts: 122

2014 Defender 110 Puma 2.2 USW Firenze Red

I bolted mine through the ash tray and haven't had any problems - I have a large phone and not had any issues with rotating etc.

Apologies if I have not understood the problem you guys are having.

Click image to enlarge

15th Apr 2019 7:22pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

Is that attached with self tappers? 2002 110 td5

15th Apr 2019 7:30pm

newton-tony

Member Since: 18 Sep 2016
Location: Wiltshire
Posts: 122

No, I took the ash tray out and removed the cover - then drilled holes and used small bolts to attach the RAM mount

15th Apr 2019 7:33pm

leeds

Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8581

Hi Jimb, what have you used to connect the Ram mount to the dash as I can not tell from your photograph?

We have used ram mounts for holding iphones, ipads and tough books. The only time we have had movement is on extremely rough roads.

Brendan

15th Apr 2019 7:57pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

https://www.mudstuff.co.uk/products/ram-mo...mount.html

It’s this one. It is marketed as utilising the central dash screw behind the ash tray. 2002 110 td5

15th Apr 2019 8:11pm

markb110

Member Since: 22 May 2010
Location: Guildford
Posts: 2634

I used to use the Ram Mount Twist Lock Suction Base until a few weeks back when it decided to fall off, got spotted by the motion detector then set the alarm off. Fortunately for the neighbours they got to hear the two uprated horns I fitted a few years ago.

Its amazing how fast you can run when you think your motor is being tampered with.

I took the tapered base off the suction section then attached it to the inner side of the windscreen vent (TD5) with a longer screw. I did not screw the other side to the dash but instead used 3m High Bond Tape so it can come off again without leaving a hole. I have also done the same for the passenger side to.

15th Apr 2019 8:33pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum