DEFENDER2.NET - View topic - Immobiliser LTB00893 Bulletin

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Immobiliser LTB00893 Bulletin

Page 1 of 1

Print this entire topic ·

sweepc

Member Since: 19 Jun 2011
Location: uk
Posts: 568

2013 Defender 90 Puma 2.2 XS CSW Santorini Black

Immobiliser LTB00893 Bulletin

What do we all know about the LTB00893 Bulletin. My immobiliser seems to be at fault meaning the car obviously won't start. It seems to be affecting the central locking, indicator lights and interior light which leads me to think it is a faulty 10AS unit.

The unit is no longer produced so needs to be updated and therefore updates to wiring and the key fob.

Has anybody had this issue?

Also Land Rover seem to be of no help at all regarding the issue/bulletin or parts needed to repair.

Thanks

13th Feb 2019 10:25pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

have read this post

https://www.defender2.net/forum/topic59742.html

14th Feb 2019 8:59am

sweepc

Member Since: 19 Jun 2011
Location: uk
Posts: 568

Thanks dorsetsmith I have had a read through that post and a few others. I was just wondering if anybody had any tips on resolving the issue or dealing with Land Rover regarding the parts etc.

14th Feb 2019 10:22pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17374

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

There have been several LTBs concerning the AS10 and its successor, three of which have been discussed in the linked thread above.

LTB00893 however, as far as I know, covers the case when an AS10 (or the cheap-and-nasty thing that LR replaced the AS10 with when the AS10 became available) becomes unserviceable, and involves the removal of the AS10-type system and its replacement with a number of discrete devices. In effect it is a replacement of the entire alarm and immobiliser system with something completely different.

I also believe that it is an expensive modification.

15th Feb 2019 8:12am

X4SKP

Member Since: 29 Nov 2013
Location: Berkshire
Posts: 2295

2010 Defender 90 Puma 2.4 SW Stornoway Grey

Hello sweepc

In considering your options it may be worth speaking with Paul Brown
at Technozone. If your AS10 is at fault this may be one route to see if
it can be saved.

Paul was extremely helpful to me when I had an intermittent starting problem
and was progressively working through the Puma set up to find the fault
(Lucus Ignition Switch... Defender used daily 1 non start a month

)

https://www.technozen-electronics.co.uk/contact/

Good Luck SKIP
https://www.defender2.net/forum/topic83242.html

15th Feb 2019 8:35am

sweepc

Member Since: 19 Jun 2011
Location: uk
Posts: 568

Thanks guys, I have already read up on all the related posts on the forum. My 10AS unit seems to have totally failed so it won't start at all. Blackwolf the parts for the modification are pretty expensive, I was initially told in excess of £1000 but its a little less. The replacement unit itself is identical however it need a number of other additional components.

16th Feb 2019 8:05am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17374

Can you get one from a breaker?

16th Feb 2019 9:15am

sweepc

Member Since: 19 Jun 2011
Location: uk
Posts: 568

Not looked to be honest, I don't know any local breakers that would have one and I wouldn't want to buy something like that online for obvious reasons. Also the unit clearly isn't manufactured very well, I believe it has now been superseded 7 times so I'm told. I wouldn't want to be too far from home only to suffer with the same fault again.

16th Feb 2019 4:06pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6092

It shouldn't matter buying one online... you have to synch them with the engine ECU (which the seller won't know), and you can delete any programmed plippers and install your own.

the only thing that would remain the same would be the PUK code thing... you could always get the unit posted to another address (family member?) no where near you.

21st Feb 2019 1:46pm

sweepc

Member Since: 19 Jun 2011
Location: uk
Posts: 568

I wasn't too bothered about that, I'm just weary about buying parts for newer Defenders online because of the theft issue. Of course I wouldn't have an issue buying from a reputable company but couldn't find any at the time. I'm certainly not going to buy such a unit from just anybody off the internet.

23rd Feb 2019 5:28pm

MR_JAMES

Member Since: 10 Oct 2013
Location: ESSEX
Posts: 248

2011 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Why not send it off for repair? there is a company that offers that service (on google search.) 1953 80"
1987 mini city e
2011 90"

2nd Mar 2019 9:14pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

https://www.technozen-electronics.co.uk/la...-services/

2nd Mar 2019 9:20pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

MR_JAMES wrote:
Why not send it off for repair? there is a company that offers that service (on google search.)

that depends on alarm unit late black unit LRJ only

2nd Mar 2019 9:25pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum