DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > central lock

Page 1 of 1

Print this entire topic ·

Maxer

Member Since: 24 Jan 2016
Location: Mazovia forest
Posts: 4

central lock

Hello, I have a bad experience with the central locking on my 110 Defender (2015). When the frost comes (temperature minus zero after a rainy weather) it is impossible to open the central lock. When I try to open lock (using the remote pilot) the door locking pin opens and immediately close – then runs periodicaly (open and close continually about 1 s).
I suppose that the cause of such a behavior is ice located on sensor (open/close door) which wrongly informs the central locking unit of the actual state.

Have you got a similar experience ?

Best regards,

Piotr

12th Jan 2019 9:13pm

Zed

Member Since: 07 Oct 2017
Location: In the woods
Posts: 3287

2010 Defender 110 Puma 2.4 XS CSW Santorini Black

I experienced the same a couple of weeks back. Managed to get in the passenger side. Hasn't happened since.

12th Jan 2019 9:16pm

hornet

Member Since: 04 Jan 2010
Location: Western Europe
Posts: 361

Re: central lock

Maxer wrote:
Hello, I have a bad experience with the central locking on my 110 Defender (2015). When the frost comes (temperature minus zero after a rainy weather) it is impossible to open the central lock.
Piotr

This is due to the "toughness" of the opening mechanism caused by the cold. Because it does not fully open, it is immediately closed again. The only remedy is to clean and lubricate all moving parts freshly.
You can (temporarily) also program the 10AS into a pure central locking unit via nanocom and then at least handle with key without the alarm going off. But no idea what has to be done on models that do not have the 10AS -- like yours.

15th Jan 2019 11:40am

RockfieldWines

Member Since: 13 Feb 2014
Location: Monmouth
Posts: 29

2007 Defender 110 Puma 2.4 DCPU Baltic Blue

I have had a recurring battle with the central locking on my 2007 DCpU. No spine is one problem fixed then another part sticks jams or falls off. I’ve just put a steering lock on and stopped locking the doors!

25th Jan 2019 12:48pm

HardCharger

Member Since: 03 Mar 2013
Location: Manila
Posts: 737

2011 Defender 110 Puma 2.4 SW Stornoway Grey

I've experienced that if the power lock functions properly, all is well. But once power lock becomes intermittent or temporarily disabled, locking one or two doors by hand becomes impossible. Why is this? Do I need to adjust something?

26th Jan 2019 5:43am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum