↓ Advertise on Defender2 ↓

Home > V8 > LS3 "economy"
Post Reply  Down to end
Page 3 of 3 <123
Print this entire topic · 
sako243



Member Since: 08 Jul 2014
Location: Wales
Posts: 1218

Wales 1994 Defender 110 300 Tdi CSW Alpine White
From a cursory look under the bonnet of my TDV8 (read replacing EGR valves) and the engine bay of the Defender it looks workable.

No one's done it but I've spent a fair bit of time reading the workshop manuals for the engine and the various sensors used to run it and I think designing a bespoke ECU to control it shouldn't be too difficult. I wouldn't do the 'normal' which is bodge all the sensors to make the standard ECU work which other companies tend to do.

Source me a cheap TDV8 and I'm willing to give it a go... Whistle Ed
82 Hotspur Sandringham 6x6
95 Defender 110 300Tdi
Post #736462 24th Oct 2018 8:01am
View user's profile Send private message View poster's gallery Reply with quote
Stacey007



Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3750

United Kingdom 
mmm there in lies a problem so far, the 3.6 TDv8 is much cheaper than the 4.4.

Found a New one for £10K

https://www.ebay.co.uk/itm/RANGE-ROVER-4-4...:rk:3:pf:0


Then only yesterday I was behind a Vauxhall VXR with I think this engine in, it sounded great Smile


https://www.ebay.co.uk/itm/Vaxuhall-Opel-V...:rk:3:pf:0

Its £7500



Now I watch a few of those American car programs where they put this LS3 engine in almost anything, the other week a Porsche 911 !!


However realistically for my use I'm sure the TDv8 in a Defender would be superb. My dad used to get 35 mpg out of his old one and it sounded great. When you wanted to go it also had some beans Smile


I guess if the new engine is £10k then once you start having to do all the other work your into £15 / £20K mark. With Brakes and other mods? Too much Crying or Very sad



How about another option.... Buy a complete TDv8 they are less than £20K now and can the body of the defender fit on it. Again The american programs do this all the time with old American car bodies but underneath is a new car body.


Thumbs Up I would like this also, the looks of the Defender with the more modern bits under Smile ooh wait that's what the G class have pretty much done with the G wagon Smile kept the looks but everything else new.
Post #736468 24th Oct 2018 9:33am
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

United Kingdom 
Quote:
How about another option.... Buy a complete TDv8 they are less than £20K now and can the body of the defender fit on it. Again The american programs do this all the time with old American car bodies but underneath is a new car body.

This is relatively straightforward when both vehicles have a separate chassis but not with vehicles like the FFRR or RRS. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #736475 24th Oct 2018 10:31am
View user's profile Send private message View poster's gallery Reply with quote
sako243



Member Since: 08 Jul 2014
Location: Wales
Posts: 1218

Wales 1994 Defender 110 300 Tdi CSW Alpine White
Stacey007 wrote:
mmm there in lies a problem so far, the 3.6 TDv8 is much cheaper than the 4.4.

Found a New one for £10K

https://www.ebay.co.uk/itm/RANGE-ROVER-4-4...:rk:3:pf:0


Then only yesterday I was behind a Vauxhall VXR with I think this engine in, it sounded great Smile


https://www.ebay.co.uk/itm/Vaxuhall-Opel-V...:rk:3:pf:0

Its £7500



Now I watch a few of those American car programs where they put this LS3 engine in almost anything, the other week a Porsche 911 !!


However realistically for my use I'm sure the TDv8 in a Defender would be superb. My dad used to get 35 mpg out of his old one and it sounded great. When you wanted to go it also had some beans Smile


I guess if the new engine is £10k then once you start having to do all the other work your into £15 / £20K mark. With Brakes and other mods? Too much Crying or Very sad



How about another option.... Buy a complete TDv8 they are less than £20K now and can the body of the defender fit on it. Again The american programs do this all the time with old American car bodies but underneath is a new car body.


Thumbs Up I would like this also, the looks of the Defender with the more modern bits under Smile ooh wait that's what the G class have pretty much done with the G wagon Smile kept the looks but everything else new.


Just sold my TDV8 for significantly less than that which was an entire vehicle running. But didn't need both vehicles and I'll always keep the 110 so why the L322 went. By cheap I mean really cheap. After all ideally need to move house to somewhere with a garage first! Whistle Ed
82 Hotspur Sandringham 6x6
95 Defender 110 300Tdi
Post #736490 24th Oct 2018 12:52pm
View user's profile Send private message View poster's gallery Reply with quote
Bristol 90XS



Member Since: 31 Oct 2010
Location: North of Bath
Posts: 223

England 
too scared to work out the fuel economy in the LS3 BUT IN MY 110 I get roughly 280 miles per tank...
Post #748551 1st Jan 2019 8:25pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sako243



Member Since: 08 Jul 2014
Location: Wales
Posts: 1218

Wales 1994 Defender 110 300 Tdi CSW Alpine White
Thanks! I've just worked it out for you and it's not actually that bad. Mind you I did just do SW Surrey to Inverness and back on a tank and a half in my 300Tdi. Ed
82 Hotspur Sandringham 6x6
95 Defender 110 300Tdi
Post #748553 1st Jan 2019 8:28pm
View user's profile Send private message View poster's gallery Reply with quote
Bristol 90XS



Member Since: 31 Oct 2010
Location: North of Bath
Posts: 223

England 
yep just bit bullet and worked out around 16/17 MPG... Laughing
Post #748574 1st Jan 2019 9:01pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
Not reallt the thread for it but how's the LS3 running now Bristol? All issues sorted? James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #748576 1st Jan 2019 9:13pm
View user's profile Send private message View poster's gallery Reply with quote
Bristol 90XS



Member Since: 31 Oct 2010
Location: North of Bath
Posts: 223

England 
See PM mate and also separate thread!
Post #748578 1st Jan 2019 9:14pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
Bow down Thumbs Up James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #748584 1st Jan 2019 9:37pm
View user's profile Send private message View poster's gallery Reply with quote
X4SKP



Member Since: 29 Nov 2013
Location: Berkshire
Posts: 2295

United Kingdom 2010 Defender 90 Puma 2.4 SW Stornoway Grey
Post #769715 23rd Apr 2019 1:54pm
View user's profile Send private message View poster's gallery Reply with quote
JOE_130



Member Since: 26 Nov 2014
Location: Chelmsford
Posts: 104

United Kingdom 2015 Defender 130 Puma 2.2 HCPU Java Black
Sorry for a bit of a thread revival but it makes for good reading this one!

I agree with the premise of not putting an LS3 in anything you care about fuel consumption for, that can be solved with some big side slung tanks (knew the 130 wheel base was meant for something Very Happy )

Biggest concern in my mind is the calibration robustness of the typical LS3 crate engines off the shelf. In my experience engines like this are only calibrated and made robust enough for your average kit car and therefore ECU strategies aren't tested to altitude or against poor fuel.

Anyone got any experience on how crate engine packages cope with thinner air at higher altitude and poorer fuel quality?

An LS often pops in to my mind when the 130's fully laden and crawling up a hill but I don't want to give up on dreams to take it to the Atlas mountains some day (you can get to 3000m on the Col del Sommeiler in France alone which is an excellent drive for those that haven't). Not worried about losing power at the tops of mountain passes only running incredibly rich and washing the bores/causing engine damage.
Post #804575 3rd Dec 2019 11:50am
View user's profile Send private message View poster's gallery Reply with quote
Mo Murphy



Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2227

United Kingdom 1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey
Tdis smoke quite well on the way up to the glacier Very Happy
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey
Post #806361 15th Dec 2019 7:40pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 3 of 3 <123
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums