DEFENDER2.NET - View topic - Instrument Binnacle

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Instrument Binnacle

Page 1 of 1

Print this entire topic ·

baldylocks

Member Since: 23 Sep 2010
Location: Gods Own County
Posts: 99

1996 Defender 90 300 Tdi HT Stornoway Grey

Instrument Binnacle

I'm in the process of adding a permanently live power socket to the dash and thought I would take the opportunity to hard wire the phone charger and sat nav power leads behind the dash.

My Tom Tom sits between the top of the instrument binnacle and the circular vent so I want to feed the power cable up to it. To do this I need to take the top off the binnacle, I've removed the two screws that are in the top of the dash but this doesn't seem to allow much movement, is there anything else to undo?

5th Jun 2011 8:24pm

TJ101

Member Since: 30 May 2007
Location: Taunton Somerset
Posts: 3750

2015 Defender 110 Puma 2.2 XS CSW Montalcino Red

Hi,, With the 2 screws removed, the binnacle top panel will just pull off upward,, one, or maybe 2 plastic tags secure it,, !! California F1, 75th 110 "Kermit", 50th Ann V8, 90 V8 Hybrid, 55 Series 1

Main Brian James Trailer Dealer for South West UK

5th Jun 2011 8:44pm

Lorryman100

Member Since: 01 Oct 2010
Location: Here
Posts: 2686

I fitted the power unit in behind the drivers speaker (plenty of room in here and it is easy to get a live from the fusebox or feeding the cable through to the centre console for fitting to the cig lighter or the radio, I have an alpine bluetooth unit and the tomtom usb power converter box in to the right of the speaker) and fed the cable out and up the right side of the dash. The power lead then tucks in behind the top of the dash and into the windscreen mount. There is plenty of room as I have run the cable for the scangauge along the same route.
Originally I wanted to do the same as you and go through the top, but found out that the dash doesn't sit flush again with the power lead exiting through the top as it is a tight fitting unit.

Click image to enlarge

5th Jun 2011 8:45pm

baldylocks

Member Since: 23 Sep 2010
Location: Gods Own County
Posts: 99

Thanks Guys. AFter fiddling about a bit today and persusing tinternet it will be a combination of the two as I've found a semi permanent mount for the tomtom and the dremel cut a nice little slot out of the edge of the plastic above the clock for my phone.

Gerry

6th Jun 2011 3:17pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum