DEFENDER2.NET - View topic - 300tdi electrical issue?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > 300tdi electrical issue?

Page 1 of 1

Print this entire topic ·

Hock

Member Since: 12 Sep 2011
Location: Yorkshire
Posts: 131

2014 Defender 110 Puma 2.2 XS CSW Java Black

300tdi electrical issue?

I have a 1996 300tdi truck-can that was rebuilt a few years back, but I’ve had an electrical gremlin for a while 🙄 I could do with a bit of advice as my auto electrical skills are 0 lol
The truck has led lights all round, if I put the side lights on all is fine, if I put the headlights on the fuel and temp gauges go up and the horn doesn’t work as if there’s not enough power?
I thought it may be the aftermarket headlights causing the issue, but if the lights are off and I put the heater on full, it does the same, dials go up and as if horn doesn’t have enough power? 🙈 wipers would go the same way, slow, as if there’s not enough power.
Any clues as to the issue before I have to take it to a specialist? 🤓

22nd Oct 2018 6:27pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6093

Sounds like a classic earth fault.

It's missing or broken somewhere. Easiest way is to get some decent cable (25~35mm2 stuff), make up some leads from the battery -ve to the chassis, gearbox and onto the bulkhead.

Then maybe had a delve around behind the dash to see if there is a wayward wire anywhere.

22nd Oct 2018 6:34pm

Hock

Member Since: 12 Sep 2011
Location: Yorkshire
Posts: 131

Thanks for that, thought that might be the case. Will have to investigate further, on a side not the blower appears to be hot or hot......no cold, I’m guessing that could be contributory?

22nd Oct 2018 7:35pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6093

The heater heat is controlled by a cable (on the RH of the dash), it just operates a flap in the heater unit uself...purely mechanical.

Probably just needs adjusting... there's a clamp thing that locks on the cable (at the heater end), that may have come loose and moved up the cable a bit.

23rd Oct 2018 6:15am

Hock

Member Since: 12 Sep 2011
Location: Yorkshire
Posts: 131

Cheers, will take a look 👍

23rd Oct 2018 8:33am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum