↓ Advertise on Defender2 ↓

Home > eBay & Bargain Spots > 1984 Factory Soft Top.
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Slideywindows



Member Since: 09 Sep 2016
Location: North Essex
Posts: 1283

England 
1984 Factory Soft Top.
First time I've seen another Sept '84 factory soft top like mine (except this is a diesel) on eBay.

It's no looker and its MOT history is chequered, but it's reasonably cheap and might (ought to) sell even cheaper.

https://www.ebay.co.uk/itm/Landrover-Defen...SwJGdbtgSr

Could be a punt, instead of scratching your nice new Defender on a green lane, or converting it to a soft top?
Post #733381 6th Oct 2018 8:37pm
View user's profile Send private message View poster's gallery Reply with quote
JeremyJ



Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758

United Kingdom 
I don’t think it’s a factory soft top, has had a rear door at some stage, evidence the tie down points are added later (rivets not painted), I’m fairly confident she started life as a hard top
Post #733394 6th Oct 2018 9:24pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039

United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
Well worth it with a rebuilt 300tdi in it
Post #733395 6th Oct 2018 9:59pm
View user's profile Send private message View poster's gallery Reply with quote
VVS210



Member Since: 12 Nov 2016
Location: Hampshire
Posts: 953

United Kingdom 
JeremyJ wrote:
I don’t think it’s a factory soft top, has had a rear door at some stage, evidence the tie down points are added later (rivets not painted), I’m fairly confident she started life as a hard top


Would tend to agree with Jeremy on that point, but not necessarily because the rivets aren't painted but because of the pair of holes for the lower hinge. This is the second time this has popped up on eBay that I have seen & there is a lot of work needed to get it in a reasonable condition - bulkhead is shot, corrosion evident in body panels as well as doors, chassis probably not much better although ad says it has had a lot replaced in the last 10 years, evidence of bodging from the snorkel to the chequer plate on the bulkhead, etc. Personally I'd swerve this one, there are better examples out there.
Post #733414 7th Oct 2018 7:30am
View user's profile Send private message View poster's gallery Reply with quote
Slideywindows



Member Since: 09 Sep 2016
Location: North Essex
Posts: 1283

England 
Thanks for the input gentlemen. Thumbs Up

So I'm still looking for another 1984 factory soft top. Laughing
Post #733422 7th Oct 2018 9:19am
View user's profile Send private message View poster's gallery Reply with quote
JeremyJ



Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758

United Kingdom 
To be honest, I don’t think I’ve ever seen a factory one (that’s not military anyway) or much later.
Post #733499 7th Oct 2018 6:08pm
View user's profile Send private message View poster's gallery Reply with quote
Slideywindows



Member Since: 09 Sep 2016
Location: North Essex
Posts: 1283

England 
Well I actually washed mine today. Was so surprised to see it clean that I took a picture. Rolling with laughter


Click image to enlarge



I think you've seen mine before Jeremy. Sept '84, 2.25 petrol soft top from new I believe, as there are no marks or holes for anything else to have been fitted.(I've had two rivet counters inspect it! Laughing )

The son of the first owner said his dad bought it to tow a boat to the South of France, hence the soft top, comfy County seats and repeaters in the front wings for those French motorways.
Post #733531 7th Oct 2018 8:43pm
View user's profile Send private message View poster's gallery Reply with quote
edo



Member Since: 20 Aug 2018
Location: Devon
Posts: 378

United Kingdom 
Re: 1984 Factory Soft Top.
Slideywindows wrote:
First time I've seen another Sept '84 factory soft top like mine (except this is a diesel) on eBay.

It's no looker and its MOT history is chequered, but it's reasonably cheap and might (ought to) sell even cheaper.

https://www.ebay.co.uk/itm/Landrover-Defen...SwJGdbtgSr

Could be a punt, instead of scratching your nice new Defender on a green lane, or converting it to a soft top?


Oh dear.

Date tested
12 December 2017
PASS
Mileage
132,542 miles
MOT test number
9558 4298 9799
Expiry date
11 December 2018
Advisory notice item(s)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Steering box has a slight oil leak (2.2.D.2e)
Nearside Front Track rod end ball joint has slight play rear (2.2.B.1f)
Oil leak ()
Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement both front bushes (2.4.G.2)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Body has slight corrosion floor (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)


Date tested
11 December 2017
FAIL
Mileage
132,542 miles
MOT test number
4388 2015 4010
Reason(s) for failure
Exhaust has a major leak of exhaust gases tail pipe (7.1.2)
Advisory notice item(s)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Steering box has a slight oil leak (2.2.D.2e)
Offside Front Ball joint dust cover damaged, but preventing the ingress of dirt drop arm (2.2.C.1c)
Nearside Front Track rod end ball joint has slight play rear (2.2.B.1f)
Oil leak ()
Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement both front bushes (2.4.G.2)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Body has slight corrosion floor (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Date tested
5 July 2016
PASS
Mileage
129,253 miles
MOT test number
5463 2291 4857
Expiry date
4 July 2017

Date tested
1 July 2016
FAIL
Mileage
129,253 miles
MOT test number
9270 6340 5949
Reason(s) for failure
Centre Exhaust system not adequately supported (7.1.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.Cool
Post #733533 7th Oct 2018 8:54pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums