DEFENDER2.NET - View topic - stranded

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > stranded - Immobiliser?

Page 1 of 2

Print this entire topic ·

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

2008 Defender 90 Puma 2.4 SW Stornoway Grey

stranded - Immobiliser?

hi guys

went shopping today and when i returning i cant get it to start. on the first attempt it tuned over for a couple seconds but then cut off, but now all i get is the battery light on the dash, not even the glow plug coil symbol pops up and so the defenders currently stuck in a car park and has been for the last few hours.

i have read up on a few posts on here and tried unplugging the battery but still nothing at all when turning the key

i have tried jump starting it just to eliminate this from the list but no luck.

anyone got anything i can try to try get it going again? currently on the phone to the aa but not sure they will get anywhere

thanks

27th Jun 2018 7:59pm

shropshiredefender

Member Since: 05 Jun 2017
Location: Shropshire
Posts: 834

2011 Defender 110 Puma 2.4 USW Santorini Black

Simple things first and you have probably checked already that the earth lead is tight on the battery?

27th Jun 2018 8:12pm

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

yeah completely un-attached and re-attached the battery still no luck! i read somewhere about some 'code' that needs to be entered to disable to the immobiliser through some sequence with the key but not sure if that was a thing or someone taking the P*ss

27th Jun 2018 8:17pm

shropshiredefender

Member Since: 05 Jun 2017
Location: Shropshire
Posts: 834

Then remove and replace the relays under the drivers seat in turn. They should be a good tight fit

27th Jun 2018 8:18pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

I might be wrong but don’t you have to leave the battery off for 30 mins to reset everything? I’m sure someone will be along soon to tell me I’m wrong

Ray
My build thread
http://www.defender2.net/forum/topic17615.html

27th Jun 2018 8:19pm

JMG

Member Since: 16 Apr 2014
Location: Surrey
Posts: 222

2014 Defender 90 Puma 2.2 XS CSW Stornoway Grey

There’s definitely something to the code thing but

if I can remember it.

27th Jun 2018 8:22pm

shropshiredefender

Member Since: 05 Jun 2017
Location: Shropshire
Posts: 834

If you have your drivers pack with you you may have the method and unlock code in it.

27th Jun 2018 8:22pm

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

The AA guy has just checked the relays under the seat, and yeah i have the drivers pack with me any ideas where that code would be? This guy reckons that the code is only on the newer vehicles and morn this one

27th Jun 2018 9:15pm

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

still no luck getting it started as of yet but found a separate fuse under the drivers seat that keeps blowing every time a new one is inserted and ignition switched on, will post a pic tomorrow when i have time to see if any of you fellas recognise what its connected to, thanks for the help guys

27th Jun 2018 11:01pm

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

27th Jun 2018 11:02pm

ARC99

Member Since: 19 Feb 2013
Location: North Yorkshire
Posts: 1831

2008 Defender 110 Puma 2.4 USW Cairns Blue

S.H.M.B.O. had this problem a couple of years and some on here suggested that she get out , lock the vehicle wait 2 minutes the unlock and try and start it . That worked and still does , if I remember correctly its down to the immobiliser and key fob. Don't make old people mad.
We don't like being old in the first place,
so it doesn't take much to

us off.

Richard

28th Jun 2018 9:03am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

scottchad01 wrote:
still no luck getting it started as of yet but found a separate fuse under the drivers seat that keeps blowing every time a new one is inserted and ignition switched on, will post a pic tomorrow when i have time to see if any of you fellas recognise what its connected to, thanks for the help guys

Fuse 8 10amp white / green wire ign input too AS10 alarm unit and battery back sounder

AS10 alarm gray plug pin 10 ign input and battery back sounder pin 1

may not be your problem or fix will see the pic

Last edited by dorsetsmith on 29th Jun 2018 11:59am. Edited 1 time in total

28th Jun 2018 11:52am

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

this is the fuse that keeps blowing (under the drivers seat) not sure the photos will be clear but any help will be appreciated

Click image to enlarge

(circled in black)

Click image to enlarge

28th Jun 2018 7:21pm

scottchad01

Member Since: 17 Jan 2018
Location: North Wales
Posts: 94

and thanks again for all the comments, im slowly working through checking each when i have a spare minute

28th Jun 2018 7:23pm

marcoegyptos

Member Since: 16 May 2009
Location: Vetraz-Monthoux
Posts: 29

Holder fuse P110 , fuse 15A , feed the ECM
Check under the bonnet , chafing wire .

28th Jun 2018 8:10pm

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum