DEFENDER2.NET - View topic - Headling help please

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Headling help please

Page 1 of 1

Print this entire topic ·

ChrisDefender

Member Since: 29 Oct 2015
Location: Midlands
Posts: 454

Headling help please

Hi all, hoping some of you who have been there and done it can help me please.

I’m having trouble with the fir tree clips holding my new roof lining in place, they keep popping out and the lining is therefore dropping down.

It’s in a HT 90, so there is one fixing along the centre length on the rear section, and several along the centre (above the bulkhead) where the front section overlaps the back section.

I have tried new standard 7.5mm replacement clips, and also some extra long 8mm clips but they are still coming out.

So, question. If I get some 8mm thread self tapping hex head screws and some 30mm diameter stainless washers will this be enough to hold it all in place.

Will they grip into the existing holes? Without taking the lining down I cannot measure the holes, but I presume they are 7.5mm?

Any help much appreciated as its frustrating me as the new lining looks so smart.

Cheers all.

Ps I can get these in black stainless so they should look smart

25th Apr 2018 10:28am

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2039

2013 Defender 90 Puma 2.2 XS CSW Barolo Black

I have one extra fir tree clip in my roof lining to help hold it up. It's been ok since this was added.

25th Apr 2018 12:22pm

ChrisDefender

Member Since: 29 Oct 2015
Location: Midlands
Posts: 454

Hi, thanks for the reply.

Is your extra one in the rear section then, running along the centre line from the front to the back?

Mine are all coming out on the joing between the two sections, so I am thinking I need a more permanent fixing solution?

Cheers.

25th Apr 2018 12:27pm

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2039

Yes, extra one in the middle of the rear section running along the centre front to back.

25th Apr 2018 3:26pm

PD1

Member Since: 15 Feb 2017
Location: Sandhurst
Posts: 41

I've done the same and it works fine.

26th Apr 2018 6:37am

ChrisDefender

Member Since: 29 Oct 2015
Location: Midlands
Posts: 454

Thanks chaps.

I had another go last night, gave the extra long ones a whack with a rubber malet and they seems to have gone in better. So i will see and if they still fail I will go down the more permanant route!

Cheers.

26th Apr 2018 8:32am

2010Blackdefender90

Member Since: 07 Jan 2018
Location: London
Posts: 562

2011 Defender 90 Puma 2.4 SVX Station Wagon Santorini Black

Rubber mallet.... tap ‘em in.

1st May 2018 4:58pm

2010Blackdefender90

Member Since: 07 Jan 2018
Location: London
Posts: 562

DAZ110 wrote:
Yes, extra one in the middle of the rear section running along the centre front to back.

Same here, 3 long ones, every other one... works fine.

1st May 2018 4:58pm

ChrisDefender

Member Since: 29 Oct 2015
Location: Midlands
Posts: 454

Cheers chaps,

the gentle persuasion of the mallet seems to have done the job for now!

Cheers.

1st May 2018 5:25pm

red zepplin

Member Since: 26 Mar 2015
Location: Never far from a brew (Lancashire)
Posts: 196

If they are pulling them selves out under gravity / roof lining weight try "packing" out the fir trees with a bit of heat shrink tubing WHAT COULD POSSIBLY GO WRONG
My sky lantern petition
http://chng.it/HJXmZC47

1st May 2018 7:44pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum