 | Home > Technical > No Hazard Lights |
 
|
|
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324  
|
Hello folks,
I wonder if anybody has any bright idea about this one. Today, I swapped all of the indicators for NAS versions and, because of a bent contact in one of the new bulb holders, managed to blow the fuse for the LH ones, F11. Now, I can't remember the exact sequence of events but the vehicle may have been locked when I started and so the fuse may have blown when I unlocked it. I suspect this because I also found that the hazard light fuse, F2, was blown and nothing would work until it had been replaced. Anyway, fault traced and fuses replaced and I have indicators again. I don't, however, have hazard lights and I've also lost the three indicator flashes when I unlock. Am I missing something obvious? I ran out of weather at the time but looking at the fuse diagram now, I wonder if I've also blown the one for the alarm, F8. Does that sound plausible? Thanks for looking. Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
21st Apr 2018 8:51pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
So, a bit of investigating this morning revealed no more blown fuses. I started with F8, a 15 amp one that appears to be the main one for the alarm. It was fine but, interestingly, when I pulled it the alarm went off, which suggests it does have a BBUS afterall
 Damned if I can find it, which I guess is the point 
Anyway, I checked all of the other alarm related fuses without any luck so now I'm wondering if I've somehow blown the hazard switch. Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
22nd Apr 2018 12:00pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Further developments! Through a convoluted series of events involving a jet wash setting the alarm off, I found another fuse associated with the hazards, F30. Dunno how I missed it first and second times around
Anyway, replaced the blown 15 amp fuse and I now have hazards, three flash indicators when locking and I know that the alarm works (as do several of my neighbours). Got there in the end. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
22nd Apr 2018 2:29pm |
|
| shropshiredefender Member Since: 05 Jun 2017 Location: Shropshire Posts: 834  
|
Thanks Land Rover Anorack - another piece of useful information about the interconnectivity of alarm related things!
I hope I remember it when the time comes
 |
||
|
22nd Apr 2018 3:01pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
