DEFENDER2.NET - View topic - 90 CSW

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > 90 CSW - Rear seat belt bolt?

Page 1 of 1

Print this entire topic ·

jr1104

Member Since: 05 May 2016
Location: England
Posts: 78

90 CSW - Rear seat belt bolt?

Hi everyone,

I previously removed two of the 4 inward facing rear seats, in order to give myself some more storage space. I'm now refitting these two seats (in prep for selling

), but would like to replace one of the seat belt bolts as the current is a bit chewed up.

I'm likely doing a bad job of searching, but I can't find a parts list anywhere that includes these specific bolts:

Click image to enlarge

Click image to enlarge

It takes a 17mm socket, but doesn't seem to be a standard M10 thread. Any ideas on where I can order one from would be much appreciated!

Thanks

18th Feb 2018 8:07am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

The thread will be 7/16th UNF. I'm not sure of the exact name of these types of bolts with the wider shank but a quick trawl of eBay revealed these that would do the job:

https://www.ebay.co.uk/itm/4-x-Seat-Belt-H...SwKQ9aOj~~

Interestingly, they don't seem to be listed as a separate part in the parts book, instead coming as a package with the belts. Also, when I recently bought new, non-LR, lap belts for use in the rear of my 90, they also came with the mounting bolts. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

18th Feb 2018 8:18am

jr1104

Member Since: 05 May 2016
Location: England
Posts: 78

Thanks very much, that's put me in the right direction. The ones on eBay look a bit short (need to make sure the bolt gets fully threaded through the spreader plate). However, with that help I've now found Land Rover do their own seat belt fitting kit (STC1180). Ordered one of them, and will confirm if it has the correct bolt included.

Thanks again

19th Feb 2018 7:02am

LandymanStefan

Member Since: 30 Aug 2017
Location: Surrey
Posts: 881

What size are the other rear seat bolts m6x? Was going to look at mine on the weekend but didn't get a chance

19th Feb 2018 4:32pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

You mean the ones securing the seats to the wheelboxes? Yes, typically M6. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

19th Feb 2018 5:31pm

LandymanStefan

Member Since: 30 Aug 2017
Location: Surrey
Posts: 881

Yeah it's the length I'm not sure about? 30mm?

19th Feb 2018 5:36pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Probably less than that - they're only going through a couple of layers of steel/ali. In fact, when I installed two seats in mine recently, I used the shortest that I could get away with and installed them from underneath so that the threads were protected and I could put caps over them:

Click image to enlarge Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

19th Feb 2018 5:41pm

LandymanStefan

Member Since: 30 Aug 2017
Location: Surrey
Posts: 881

Do you remember what length they were?

19th Feb 2018 6:49pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Can't remember, off hand. Probably either 16mm or 20mm. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

19th Feb 2018 7:21pm

jr1104

Member Since: 05 May 2016
Location: England
Posts: 78

That sounds about right. I went with 40mm because I wanted to ensure it got through the extra soundproofing I'd added, and they're still a bit too long. 20 or 25mm is probably fine for standard fitment.

20th Feb 2018 6:29am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Ah, I made cut-outs in my sound proofing and carpet for the seat and belt mounting points:

20th Feb 2018 7:49am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum