DEFENDER2.NET - View topic - Grease for propshaft UJs (original)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Grease for propshaft UJs (original)

Page 1 of 1

Print this entire topic ·

UtilityTruck

Member Since: 09 Jan 2014
Location: Oxford
Posts: 463

Grease for propshaft UJs (original)

I have a grease gun loaded with a light lubricant for my pillar drill, recently I ground the tip to fit the grease nipple on the prop shafts. What came out of the joints was a very dark grease, somewhat like the one shot hub grease and a lot heavier than what I was pumping in.

I can find no mention in any of the tech documentation regarding the suitability of grease for the props- while I’d like to keep them lubricated I’m only too aware using the wrong lube could result in a shorter service life. It seems there are many opinions on what is best to use- does anyone know any information about the original fill grease spec for the prop UJs?

I also have some slightly thicker marine stern tube grease which I could use, either way I’ll need a new gun because changing the grease over is too messy and time consuming!! 2014 Keswick Utility 2.2

24th Dec 2017 9:39am

miker

Member Since: 13 Sep 2015
Location: Surrey
Posts: 1763

I just use normal lithium grease in mine, same as I'd use in the wheel bearings.

The grease you pumped out was just old and knackered

24th Dec 2017 9:49am

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Hello UT. You are right it is a heavy dark grease. I use a lithium based Morris K48 Moly grease for my UJs and wheel bearings. Works a treat.

24th Dec 2017 9:50am

UtilityTruck

Member Since: 09 Jan 2014
Location: Oxford
Posts: 463

That K48 moly grease looks like the stuff to use, I'll get some on order! 2014 Keswick Utility 2.2

24th Dec 2017 10:05am

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

2007 Defender 110 Puma 2.4 SW Chawton White

UJ uses lithium based grease. Sliding joints use Moly grease. Both NGLI2. Puma 110" SW

.............................................................
Earth first. Other planets later

24th Dec 2017 10:54am

nitram17

Member Since: 08 Jun 2014
Location: newcastle
Posts: 2261

miker wrote:
I just use normal lithium grease in mine, same as I'd use in the wheel bearings.

The grease you pumped out was just old and knackered

How often do you grease uour props and wheelbearings?and do you need a special grease nipple?s i havent parden the language greased a nipple for many years can anyone reccommend a decent all round grease gun?

Click image to enlarge

Just a photo for festive cheer and to remind me of youthfil times before sealed bearings and when i was a dab hand with a grease gun..that was so last century!

Youf is wasted on the young

24th Dec 2017 10:57am

Devon-Rover

Member Since: 22 Jan 2015
Location: South Devon
Posts: 916

2014 Defender 110 Puma 2.2 USW Aintree Green

Click image to enlarge

I do the props every 4 or so months depending on conditions. If I have been doing offroad work then after cleaning I'll do them to put fresh grease in to keep things happy. It's easier than having to do a UJ swap.

I have a swiss Wanner grease gun and it works well using comma high performance bearing grease.

24th Dec 2017 11:05am

UtilityTruck

Member Since: 09 Jan 2014
Location: Oxford
Posts: 463

MK wrote:
UJ uses lithium based grease. Sliding joints use Moly grease. Both NGLI2.

The K48 moly from Morris is lithium based? NGLI2 refers to the 'consistency' only doesn't it? 2014 Keswick Utility 2.2

24th Dec 2017 11:09am

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

NGLI refers to consistency. I do not use moly on UJs or bearings. Some people do. Puma 110" SW

.............................................................
Earth first. Other planets later

24th Dec 2017 11:17am

UtilityTruck

Member Since: 09 Jan 2014
Location: Oxford
Posts: 463

So what's wrong with moly grease? The page for the Morris lubricant makes it sound suitable, data sheet here- https://www.morrislubricants.co.uk/fileupl...559330.pdf

So any idea what is put in the joints at the factory? 2014 Keswick Utility 2.2

24th Dec 2017 11:50am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17372

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

As noted above, lithium based is best for rolling surfaces (UJs and bearings) and molybdenum based grease best for sliding surfaces (splines etc). That being said in normal applications (propshafts etc) either will be quite suitable, but I would not use moly for wheel bearings.

You don't need a special connector to grease the propshafts if you jack up one wheel so you can spin the prop, however the only correct way to grease the UJs thoroughly, which is seldom done now, is to unbolt one or both flanges so that you can fully articulate the joint.

24th Dec 2017 12:10pm

williamthedog

Member Since: 29 Dec 2012
Location: south wales
Posts: 3441

I've used jcb blue grease on propshafts for years with no issues

24th Dec 2017 8:25pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum