 | Home > My Defender > Daisy the Doublecab |
 
|
|
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123   
|
I followed a guide on http://defender90xs.blogspot.co.uk/2014/09...ation.html
Its not hard if you're confident in our own abilities. I have installed buttons on the side of the steering cowl that control the unit in situ so I have full functionality. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html Instagram - @r22oyp Roy |
||
6th Oct 2016 11:21am |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
I also created my own sub enclosure that fits perfectly behind the double cab rear seats. It's designed to fit in the gap and have the correct capacity to allow the correct performance of the sub fitted. Also hidden out the way of prying eyes. Sounds good and makes the listening of any music much more enjoyable.
[URL=]  Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] Amp is installed under the passenger rear seat so all cables are out the way and tidy 👍 Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html
Instagram - @r22oyp Roy |
||
|
6th Oct 2016 11:25am |
|
| Christian1402 Member Since: 17 Feb 2016 Location: Cumbria Posts: 214 
|
That's a really neat solution! I like it.
You don't see enough silver defenders, I'll be taking some ideas off yours though. Keep up the good work 
Also, what's the air box mod?? |
||
|
6th Oct 2016 1:07pm |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
Thanks, the airbox mod is covered on the forum a few times but it entails removing the "cyclone" in the intake pipe and enlargening the inside of the airbox, inside the airbox is a cylinder that can be cut out to allow more air into the airbox. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html
Instagram - @r22oyp Roy |
||
|
6th Oct 2016 1:16pm |
|
| Christian1402 Member Since: 17 Feb 2016 Location: Cumbria Posts: 214
|
I see, it's the first I've heard about it. I'll have to look into that.
Can't beat free mods after all! |
||
|
6th Oct 2016 1:18pm |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
Yeah there is a post in the search section which covers it, I used a soldering iron with a scrap tip to remove the plastic inside the airbox, leaves a smooth edge then. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html
Instagram - @r22oyp Roy |
||
|
6th Oct 2016 1:29pm |
|
| Christian1402 Member Since: 17 Feb 2016 Location: Cumbria Posts: 214
|
Perfect, thanks
|
||
|
6th Oct 2016 1:38pm |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
No worries,
Next on the list of things to do will be; Coloured wing mirrors, New front bumper for a spectre inspired one without the winch tray, New front grill/light surrounds, 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html Instagram - @r22oyp Roy |
||
|
14th Oct 2016 9:35am |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
Made it into LRO mag this month too
[URL=] Click image to enlarge[/URL] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html
Instagram - @r22oyp Roy |
||
|
14th Oct 2016 1:29pm |
|
| JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7904 
|
I spotted you! Well done
James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
|
14th Oct 2016 1:43pm |
|
| Roy5695 Member Since: 15 Feb 2014 Location: Cornwall Posts: 1123
|
Well a lot has happened since my update so ill add a few bits while I'm here;
gloss black mirror backs on, front bumper on, new front grill and light surrounds on, rock and tree sliders on. double din installed. Think thats everything apart from a few minor details. Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Oh and I also have a full set of Optimal race aluminium parts to fit; window blocks, bonnet hinges, door hinges, exterior door handles, fuel cap. 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html Instagram - @r22oyp Roy |
||
|
21st Nov 2017 3:21pm |
|
| JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7904
|
Looking great Roy!
It's always so shiny!! James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
|
21st Nov 2017 3:46pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795 
|
Great build thread Roy, will have to keep an eye out for you on the Cornish roads
2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
21st Nov 2017 6:49pm |
|
| Harry.O Member Since: 25 Jul 2014 Location: Warwickshire Posts: 712 
|
Really smart 110 Roy! Did you paint or powder coat the rood rack? 2005 Td5 110 Hardtop
1989 300Tdi 90 Soft top 1992 200Tdi 90 Truck cab with Land Cruiser axles |
||
|
21st Nov 2017 7:11pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
