 | Home > My Defender > 1986 110 station wagon project |
 
|
|
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381  
|
Welcome, looks like a bit of work is ahead
Here's your photo.  Click image to enlarge |
||
29th Jun 2017 7:47pm |
|
| mini Anaconda Member Since: 23 Aug 2016 Location: Thames Valley Posts: 783
|
Welcome to the forum!
Sure you recognise my username from elsewhere.  BORG - Bucks & Oxon 4x4 Response Group
|
||
|
29th Jun 2017 8:28pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10742 
|
Welcome
Nice original landy  1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
29th Jun 2017 8:38pm |
|
| JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7905 
|
Lovely looking classic Defender, love it.
Look forward to seeing the progress. James MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
|
29th Jun 2017 8:46pm |
|
| Ellisboy Member Since: 13 Oct 2013 Location: Deep South Posts: 539 
|
Welcome
that's nice 
Stephen. |
||
|
29th Jun 2017 9:18pm |
|
| Profyaffle Member Since: 03 Oct 2016 Location: N Yorks Posts: 527
|
Welcome.. nice to see another Yorkshire Landy.. it looks lovely.. What are planning to do with it? 1993 200Tdi Defender 90
|
||
|
30th Jun 2017 9:22am |
|
| defender9 Member Since: 12 Mar 2016 Location: Fylde Coast Posts: 1629 
|
Nice project. I have recently bought an 86 factory V8 90 as a substitute for my Series 1 which I have given my son.
Early 90/110's are where its at |
||
|
30th Jun 2017 11:56am |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5166
|
Welcome! I will be watching this with interest! Is the grill damaged? I do have a spare black one here if your interested for the price of postage. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
30th Jun 2017 8:13pm |
|
| Gas man Member Since: 29 Jun 2017 Location: East Yorkshire Posts: 33 
|
Thanks - I'll have a closer look at the grill, I thought it might be factory cut for the hole in the front panel that I presume is a flash back to having a starting handle?
The plan so far; 1. Stripping rear suspension and welding on a new rear half chassis I have, to give it a few more years I hope before a galv chassis 2. Repair a spare good 300tdi bulkhead, galv and swap over 3. New front wheel bearing 4. Recon or second hand 4 hole steering box (leaking) 5. New side b c posts, send them for galv with bulkhead 6. Take cappings off and galv them as well 7. Repaint as I go along, although I haven't worked out what type of red it should be as not recorded on the vin plate and there are several shades to pick from 8. New exhaust - it has a discovery 200tdi engine, but I think it still has the 2.5n/a system, which I believe is too small but I need to replace the rear section so may have to replace it all of I need 2.5tdi size 9. Doors scabby with aluminium bubbling, but he door frames are actually sound. May experiment taking the aluminium off, repairing the frames, galving them and refitting the pitted aluminium skins unless I can buy the early type skins new? Then hopefully an MOT! So the overall plan is a rolling renovation but nothing non standard, other than the 200tdi. |
||
|
30th Jun 2017 9:44pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5166
|
quite possible, though looking at it, it could have had a winch installed. the bumper looks galv unit. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
1st Jul 2017 5:09am |
|
| gcc130 Member Since: 05 Jun 2015 Location: Wiltshire Posts: 739 |
Galvanised front bumpers were standard at all hat age
|
||
|
1st Jul 2017 7:47am |
|
| Slideywindows Member Since: 09 Sep 2016 Location: North Essex Posts: 1283
|
As far as the paint colour is concerned, if that is Red it either Masai Red or Venetian Red. They were the only reds for that age of vehicle but they were a bright red.
From the photo it doesn't look red, more like a faded Roan Brown, which was replaced by Arizona Tan (but it might look different in the flesh). I notice the cappings have been painted. Are they galv'd underneath? If so the vehicle has been re-painted at some stage. Not many have survived from this era in reasonable condition, so preserving originality might pay in the long term (but whatever you do with the Td5 rear crossmember, a rivet-counter will know it's a Td5 rear crossmember!  )
Good luck with the resto, old One Tens are beginning to be appreciated as they should be. |
||
|
4th Jul 2017 9:22pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5166
|
I didn't know that, i wonder why they stopped fitting them later on Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
5th Jul 2017 5:04am |
|
| defender9 Member Since: 12 Mar 2016 Location: Fylde Coast Posts: 1629
|
The move to painted bumpers and cappings was more a styling thing as LR tried to give Defenders a more "modern" rather than agricultural appearance. I still prefer galvanised bumpers and cappings though.
|
||
|
5th Jul 2017 7:59am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
