DEFENDER2.NET - View topic - Cable to connect Nanocom to 1998 300TDi 10AS immobiliser?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Cable to connect Nanocom to 1998 300TDi 10AS immobiliser?

Page 1 of 1

Print this entire topic ·

ThatJCB

Member Since: 13 Dec 2016
Location: Essex
Posts: 4

Cable to connect Nanocom to 1998 300TDi 10AS immobiliser?

Has anyone managed to get a Nanocom to programme a 10AS from a 300TDi Defender?

At the moment my Nanocom is only unlocked for a Discovery 2 but if I was sure I could also programme the 10AS on my Defender I would buy the extra licence.

As far as I can tell the pre-TD5 Defenders don't have an OBD connector. If I could wire up a suitable cable to the immobiliser, in theory I would be able to programme key fobs and turn on the central door lock feature.

Any help would be much appreciated.

Any other low cost option to configure the 10AS would also be of interest.

Thanks --
John C Brown
Discovery 2 TD5 2004 | Defender 300TDi 1998

14th Dec 2016 2:44pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

do you EGR fitted ? as this has an OBD socket for programming if you look at the below you will find drawing

Click image to enlarge

not shore if nanocom can connect to 300 tdi 10AS immobiliser as it is not listed in there web sit

Click image to enlarge

Last edited by dorsetsmith on 14th Dec 2016 4:14pm. Edited 2 times in total

14th Dec 2016 2:51pm

ThatJCB

Member Since: 13 Dec 2016
Location: Essex
Posts: 4

I'm not familiar enough with the 300TDi to know if it still has an EGR valve.
My Disco does not have the EGR.

I'm not sure if this is relevant because as far as I know the immobiliser does not affect the EGR operation nor would it affect how I connect to the 10AS immobiliser.

Regards --
John C Brown
Discovery 2 TD5 2004 | Defender 300TDi 1998

14th Dec 2016 3:06pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

but also 10AS as far as i no is same one all the way to TD5 right up 2006

14th Dec 2016 3:28pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

also may be that Nanocom work with obd2 pin out the on diffracts but soft ware is diffracts

Last edited by dorsetsmith on 14th Dec 2016 4:27pm. Edited 1 time in total

14th Dec 2016 3:58pm

ThatJCB

Member Since: 13 Dec 2016
Location: Essex
Posts: 4

So, if I had a TD5 wiring diag and follow the output from that pin to the OBD socket on a TD5 I might be able to work out my own cable.

Thanks --
John C Brown
Discovery 2 TD5 2004 | Defender 300TDi 1998

14th Dec 2016 4:00pm

bankz5152

Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2169

I highly doubt the Nanocom would be able to connect properly, but for the cost of an extra licence you can send your 10AS off to be properly programmed, just the hassle of removing it.

15th Mar 2017 12:40pm

ThatJCB

Member Since: 13 Dec 2016
Location: Essex
Posts: 4

Thanks for the reply.

I paid for the licence and tried it out. Works fine as far as I can tell. All the options appear but I haven't tried to change any yet.
Uses the standard blue cable I have for the TD5 Discovery. I worried unnecessarily, no modification needed.

Thanks --
John C Brown
Discovery 2 TD5 2004 | Defender 300TDi 1998

15th Mar 2017 1:49pm

bankz5152

Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2169

Oh wow, thats pretty awesome! Nice one.

15th Mar 2017 2:15pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum