 | Home > Td5 > Fitting a 3/4 Exmoor canvas tilt |
 
|
|
|
| cobra_mark Member Since: 17 Feb 2015 Location: West Yorks Posts: 213   
|
Well I have gone it alone with some pictures from the web and other people's Land Rovers.
So far sticks are on and some furniture will post pictures when it is finished.  |
||
26th Nov 2016 12:37pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381
|
Looking forward to the pics, I to want put a 3/4 on Mrs Greeni's tc.
|
||
|
26th Nov 2016 12:43pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
wrong pic
 you mean gav channel at sits up been hind truck cab
find it http://www.defender2.net/forum/topic5443.html?view=previous The one fitted to my pick bolt in place at the end with D rubber between the gav channel truck cab back |
||
|
26th Nov 2016 1:12pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Pic look good
 |
||
|
26th Nov 2016 7:03pm |
|
| cobra_mark Member Since: 17 Feb 2015 Location: West Yorks Posts: 213
|
Well after a day at it in the cold we have a fitted hood, first the frame.
 Click image to enlarge All landrover parts needed to get the drip gutter in first. Click image to enlarge Click image to enlarge Click image to enlarge Had to rivet in the securing springs before fitting the gutter. Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Now to the back end, need to drill out two rivets and fresh drill two others on both side. Click image to enlarge Click image to enlarge Finally draped the hood on over with help from my wife and set about slotting the retaining aluminium angle strip into the hood and spring clip it to the drip gutter. Click image to enlarge Click image to enlarge Hay presto the finished hod, now getting stretched and bedded in. Click image to enlarge Click image to enlarge Click image to enlarge There we go, not as straightforward as I would like, but better than the ifor Williams. |
||
|
26th Nov 2016 7:04pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Water can with spray head on works or just what till it ran next time looking good
that hole land rover, if only my 03 paint work what good |
||
|
26th Nov 2016 7:14pm |
|
| cobra_mark Member Since: 17 Feb 2015 Location: West Yorks Posts: 213
|
The full respray made the chassis rebuild complete, hope it lasts a few years.
The hood will stretch a bit when it rains so let's see how it beds in.  |
||
|
26th Nov 2016 7:18pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
