DEFENDER2.NET - View topic - Main wiring loom

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Main wiring loom

Page 2 of 2

Print this entire topic ·

MadTom

Member Since: 10 Sep 2013
Location: Olomouc
Posts: 641

I had the same problem - suddenly no lights. 4 of these headers were corroded or burnt. I made a quick and dirty solution - cut out these connecting header and solder together the right wires. There are more group of wires connected in one header. And using plenty of heatschrinking tubes for isolation and vibration proof. No more problems.

Only changing the header is not enough, it is necessary also to change the wire terminals. And of course, check also the other headers. "Drobek" = The Small One - Discovery 2, "BlufÃnek" = The Blue Thing - Defender 130, and for me at least Ford Mondeo

1st Nov 2016 1:25pm

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5115

2007 Defender 90 Other CSW Trident Green

It may be worth giving Autosparks a ring they manufacturer all variants of Land rover Harness’s and looms both full and part

Autosparks Limited, 80-88 Derby Road, Sandiacre, Nottingham, NG10 5HU

0115 949 7211

https://www.autosparks.co.uk/finder/car/land_rover

https://www.autosparks.co.uk/ For those who like Welsh Mountains and narrow boats have a look at my videos and photos at..

http://www.youtube.com/user/conwy1

1st Nov 2016 1:41pm

Collydog Blue

Member Since: 06 Dec 2013
Location: Stockport
Posts: 26

Thanks Tom, I'm struggling to get hold of PaulMc, so it's looking like it might be the only option, thanks again 🙄

1st Nov 2016 1:43pm

Collydog Blue

Member Since: 06 Dec 2013
Location: Stockport
Posts: 26

Thanks Gilarion, I'll give them a call

1st Nov 2016 1:44pm

Collydog Blue

Member Since: 06 Dec 2013
Location: Stockport
Posts: 26

Sorted the problem, managed to get hold of PaulMc who sourced some header plugs out, absolute gent that I can't thank enough, so helpful.
Hopefully this will end my nightmare once I've fixed them, thanks to everyone for your help and guidance.

😁

12th Nov 2016 5:45pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum