↓ Advertise on Defender2 ↓

Home > Td5 > Defender 90, Rear Drawer System
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
christyler



Member Since: 10 Dec 2010
Location: Cork, Ireland
Posts: 67
Defender 90, Rear Drawer System
I wanted to fit a drawer system to the back of the 90. I look around at what was avalable and although the ones avalable were very good quality the prices were staggering.
So i set about making one myself, eventually the load space will be covered with a treadplate arrangement that will lift on electric rams, so all i really need is some where to put jack, jump leads,toe ropes etc so that the rest of the space is left for her indoors to fill with shopping, clothes and shoes.

I also incorperated a 350amp jump lead connector and a 12volt outlet for good measure.

I started by fabricating a 18mm wpb base to make it sturdy, i am not a carpenter but i can just about screw a few straight bits of wood together ! i made the drawer from 13mm wpb and fitted a ally frame into the front to rivit on the treadplate door, then two more bits of treadplate either side of the door to match it up.
The 24" door slides came from b&q, i painted all the wood both sides with primer first then black. the top of everything is 18mm wpb, this will be the new floor level in the rear loadspace, i sealed all around the edges of the ply with black silicone, i will probably cover the top with some black carpet.

I used stainless steel screws and self tappers throuout.

Pictures in Gallery
Post #53391 17th Jan 2011 2:25am
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3709
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
Nice one Chris Thumbs Up I do have one question though. Was the yellow square of any use bearing in mind that you were working on a land rover.



Click image to enlarge




Click image to enlarge 130's have feeling's as well you know Smile
Post #53396 17th Jan 2011 7:24am
View user's profile Send private message View poster's gallery Reply with quote
christyler



Member Since: 10 Dec 2010
Location: Cork, Ireland
Posts: 67
Square
Andrew, Actually no ! I made the base first "square" then when it came to fitting i had to adust it about 10mm.

fitting that new rear bumper was a laugh as well "it just lines up with the existing chassis holes" !!!!!!!

You have to love LR
Post #53411 17th Jan 2011 10:35am
View user's profile Send private message View poster's gallery Reply with quote
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Nice work Chris Thumbs Up
Post #53422 17th Jan 2011 12:40pm
View user's profile Send private message View poster's gallery Reply with quote
BigRuss



Member Since: 15 May 2010
Location: Norfolk
Posts: 2785
United Kingdom 2010 Defender 110 Puma 2.4 USW Santorini Black
I could ask a similar question as Andrew with regards to that spirit level? Rolling with laughter Russell
2011MY 110 XS USW Black
Post #53439 17th Jan 2011 1:53pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Bomber82



Member Since: 20 Oct 2009
Location: Alessandria - Italy
Posts: 216
Italy 2009 Defender 110 Puma 2.4 SW Zermatt Silver
Very nice work! Thumbs Up

I'm still drawing my drawer and I'm collecting the material.
Where did you find the handle you used?? Matteo
Defender 110 Td4 SE MY 09
Post #53443 17th Jan 2011 2:24pm
View user's profile Send private message View poster's gallery Reply with quote
landydubai



Member Since: 01 Sep 2010
Location: Dubai
Posts: 206
United Arab Emirates 2009 Defender 110 Puma 2.4 XS CSW Stornoway Grey
Excellent job Thumbs Up LandyDubai
Keep the shiny side up!

09 110 XS BAS remap
09 90 pick up BAS remap
08 D3 V8 G4 Spec
Bentley Speed GT 2009
G55 2003
Ford Raptor 2010 - new toy!
Post #53449 17th Jan 2011 3:19pm
View user's profile Send private message View poster's gallery Reply with quote
christyler



Member Since: 10 Dec 2010
Location: Cork, Ireland
Posts: 67
Thanks
Thanks guys, it's a work in progress, sadly i only get to work on it at the weekends. She brings it to work during the day.

Bomber82, got the handel from a local supplier, there is a great place in the UK for that sort of stuff http://www.whb.org.uk/acatalog/Locks___Handles.html I found them after i had already paid twice the price for mine, you live and learn.
Post #53564 18th Jan 2011 2:19am
View user's profile Send private message View poster's gallery Reply with quote
Bomber82



Member Since: 20 Oct 2009
Location: Alessandria - Italy
Posts: 216
Italy 2009 Defender 110 Puma 2.4 SW Zermatt Silver
Thanks Christyler!! Thumbs Up
I'm looking here in Italy but it's very difficult to find out....at the end I will ask to whb if they ship abroad.. Matteo
Defender 110 Td4 SE MY 09
Post #54867 24th Jan 2011 8:04pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums