DEFENDER2.NET - View topic - MUD Bulkhead Removal Bar fitting

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > MUD Bulkhead Removal Bar fitting

Page 1 of 1

Print this entire topic ·

Orangesofa

Member Since: 10 Oct 2014
Location: Somerset
Posts: 214

2013 Defender 90 Puma 2.2 SW Keswick Green

MUD Bulkhead Removal Bar fitting

I bought a MUD bulkhead removal bar a few months ago and am thinking I really ought to fit it!

Does anyone have experience of fitting one and if so, how long does it take (I don't fancy running out of time...) and are there any tips or tricks to ease fitting over and above the instructions on the MUD website?

Many thanks Phil

11th Jul 2016 7:59am

McGeordie

Member Since: 20 Feb 2012
Location: Central Scotland
Posts: 220

2014 Defender 110 Puma 2.2 USW Montalcino Red

I did one on my 90HT a few years ago, it took me and a friend about 1/2 a day, but my advice would be give yourself plenty of time, measure twice...measure again, then check...and only then cut! Overall it wasn't difficult. Sold Def 90 HT 2010...Stornaway..(SOLD in Oct 2014)
Current: delivered October 2014:- 110 USW XS.....Montalcino Red

11th Jul 2016 9:15am

Cupboard

Member Since: 21 Mar 2014
Location: Suffolk
Posts: 2971

2011 Defender 110 Puma 2.4 HT Corris Grey

Mine took me about half a day by myself. The biggest issue I had was fitting my TGE side panels back in again because they didn't like the flanges on the bar, and in trying to force them back in I crossthreaded the bolt on the seatbelt which isn't a standard size. Thankfully we happened to have a tap I could borrow on the farm.

You need a jigsaw and a drill. Lazy tongs or a powered riveter would be a good idea, as would some decent clamps. A grinder would help but isn't really needed - I didn't use one.

11th Jul 2016 12:27pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17337

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

I think that seatbelt mountings are usually (still) 7/16" UNF thread, but I may be mistaken.

11th Jul 2016 3:25pm

Daisy90

Member Since: 01 Feb 2015
Location: Hampshire
Posts: 845

I did one, and I measured a lot of times before chopping ( it was less than two years old at that time )
I would allow 1/2 day also,

Once again, did anyone mention measuring

11th Jul 2016 5:18pm

Cupboard

Member Since: 21 Mar 2014
Location: Suffolk
Posts: 2971

blackwolf wrote:
I think that seatbelt mountings are usually (still) 7/16" UNF thread, but I may be mistaken.

Something like that. It's a fine thread imperial about the size of an M12 bolt but with a 17mm head.
Either way it's not a size I have lying around, unlike M12

11th Jul 2016 8:23pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum