DEFENDER2.NET - View topic - Oil filter help. Urgent!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Oil filter help. Urgent!

Page 1 of 1

Print this entire topic ·

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

2007 Defender 110 Puma 2.4 XS CSW Java Black

Oil filter help. Urgent!

I've just dropped the oil out of my 2007 2.4. Removed the old oil filter and gone to fit the new one.

The old one, Purflux I think, was a snug fit on the spigot inside the filter lid and sort of clicks in and out nicely. The new one, a Mann is pretty loose once I click it in. Doesn't feel right. It can move from side to side a bit, rather than staying centred, like the bore is a bit too big. Anyone any experience of this?

I've got the correct part I think, Mann HU 711/51x but don't want to put it in if its wrong.

I guess I could put the old one back in if this new one isn't right. Help!

Last edited by Bluest on 5th Jul 2016 6:24pm. Edited 1 time in total

5th Jul 2016 5:41pm

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5109

2007 Defender 90 Other CSW Trident Green

That is definitely the right part number fits both the 2.4 and 2.2.

These are the measurements of the filter

The spigot centre hole, both top and bottom should measure 29 mm

The diameter of the filter 64 mm

The height of the filter 69 mm

Man say it fits 2.4 from MY05/7 For those who like Welsh Mountains and narrow boats have a look at my videos and photos at..

http://www.youtube.com/user/conwy1

5th Jul 2016 5:54pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

Ok, I dug the vernier calipers, remembered how to read them and did some measuring.

All the dims are as you say above on the new filter. But the old filter is different in one measurement, ithas a 25mm, not 29mm, bore. It's the old filter that's fits nicely and new one is loose. Am confused

5th Jul 2016 6:21pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

Can anyone recall when they have fitted a filter into the screw on lid does it sit snugly in the middle or can it be moved side to side?

5th Jul 2016 6:51pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

The filter I have taken out is Purflux l358a, which has a 24mm bore, but is a cross reference with the Mann but that has a 29mm bore?????

Any help would be appreciated. I think I might need to declare the car off the road until I can get a genuine Land Rover filter.

5th Jul 2016 7:23pm

driver9

Member Since: 15 Oct 2012
Location: Suffolk
Posts: 111

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

The bore of a genuine filter (LR030778) is 22.5mm

5th Jul 2016 7:37pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

Which is even smaller than the Purflux one I took out.....

5th Jul 2016 8:02pm

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

Going to get a proper genuine filter tomorrow, don't want take a risk with something that doesn't seem right.

There's a photo here with the Mann on the left and Purflux on the right. It's not that clear but I think you can see that the bores are noticeably different

Click image to enlarge

5th Jul 2016 8:42pm

williamthedog

Member Since: 29 Dec 2012
Location: south wales
Posts: 3441

I've used bearmach filters and haven't had any problems with them.
They fit quite snug as far as I can remember.

6th Jul 2016 5:34am

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4198

Bought a Ford one today, Fitted snug like the Purflux one. Will avoid the Mann one in future.

6th Jul 2016 10:27pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum