DEFENDER2.NET - View topic - Wing top vent screws

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Wing top vent screws

Page 1 of 1

Print this entire topic ·

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5889

1999 Defender 110 Td5 SW Caledonian Blue

Wing top vent screws

Would any one happen to know the screw size for the vent?
Going to fit a snow cowl and the screws + snow cowl + vent + Chequer plate are not long enough.

1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

25th Jun 2016 4:22pm

nitram17

Member Since: 08 Jun 2014
Location: newcastle
Posts: 2261

number 8 x 1 code AB608088

http://www.defendergeek.co.uk/screw---ab608088-19914-p.asp

25th Jun 2016 5:08pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5889

Thanks, so size 8 x 1"? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

25th Jun 2016 5:20pm

nitram17

Member Since: 08 Jun 2014
Location: newcastle
Posts: 2261

/\/\yes that right!

25th Jun 2016 6:07pm

L90Andy

Member Since: 29 May 2014
Location: Stratford-Upon-Avon
Posts: 722

Buy some security type ones while your at it. Plenty on ebay. Instagram: L90andy

My 1984 Ninety: http://www.defender2.net/forum/topic56071.html - SOLD!
My 2015 Defender: http://www.defender2.net/forum/topic39625.html - SOLD!

25th Jun 2016 9:10pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5889

Is there a specific thread ? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

26th Jun 2016 7:30am

nitram17

Member Since: 08 Jun 2014
Location: newcastle
Posts: 2261

Hi i only have a metric gauge so the screw diameter is m4(equates to n 8 screw as it is usually double) and the pitch 1.5 I you can get them from here: http://www.a2stainless.co.uk/Land-Rover-De...AKMGW.aspx
and they accomodate cplate!

26th Jun 2016 8:45am

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5889

Thanks I will have a look at A2 stainless

cheers 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

26th Jun 2016 12:30pm

excossack

Member Since: 22 Feb 2012
Location: North West
Posts: 5889

Screws ordered from A2. Excellent service - Sent an message via ebay on Sunday, a few replies later all sorted.
Vent fitted today. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock

30th Jun 2016 4:37pm

bhjvdb

Member Since: 07 Sep 2016
Location: Chesire
Posts: 1

2007 Defender 90 2.5 TD HT Coniston Green

Hi there,

Only just joined the community here. I have a 2007 TD5 Hard top (90) County. Starting to do some small cosmetic changes to it, and running into some small obstacles along the way. I bought one of these side vents: http://www.ebay.co.uk/itm/322050903785
However, after prying off the original plastic one (and the old pins breaking off in the holes), I realised the holes in the vent do not match the "bigger" screw holes. It does however match the holes of the pins which I can push out, but I do not know what size screw and grommet I need to get. The screw is a lot smaller than the original, but the head size needs to be the same so it holds the vent in place and does not slip through the hole.

Help please!

Thanks

7th Sep 2016 7:39pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum