↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > VCV removal and replacement
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Coolcamper55



Member Since: 22 Apr 2010
Location: Inverclyde
Posts: 45

Scotland 2007 Defender 110 Puma 2.4 XS CSW Santorini Black
VCV removal and replacement
As some on here will be aware, I have been struggling to get my vehicle running. Trouble started last August and has got steadily worse

I replaced the vcv in September last year but suspect the pressure valve on the rail was gone but did not replace that at the same time. I want to be certain the vcv has not gone again.

I have had issues with getting the valve programmed and have now spent £300 or so with diagnostics without a solution.

I did change the valve before but cannot for the life of me remember how I got the bolts out.

Is there a trick or a combination of tools that allow you to get through the forest of cables and pipes that seem to block the way. Do I have to take out components.

Really stumped Tommy

110 XS TDCi
Post #497054 27th Jan 2016 4:23pm
View user's profile Send private message View poster's gallery Reply with quote
Scoobeenut



Member Since: 04 Mar 2015
Location: West London
Posts: 310

United Kingdom 2010 Defender 90 Puma 2.4 SW Santorini Black
It's a real pig to get to. I think when I did mine I used a combination of long reach ball end allen key together with 1/4 inch square drive socket and knuckle socket. Lots of swearing and bloody knuckles too.
Post #497073 27th Jan 2016 5:25pm
View user's profile Send private message View poster's gallery Reply with quote
Coolcamper55



Member Since: 22 Apr 2010
Location: Inverclyde
Posts: 45

Scotland 2007 Defender 110 Puma 2.4 XS CSW Santorini Black
Done, 4 hours.

Found the best way for me was using a flexible drive to bend round the pipes, an extension 1/4 bar, universal joint and small ratchet.

Thanks Tommy

110 XS TDCi
Post #498716 31st Jan 2016 5:16pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20280

United Kingdom 
Did the change do the trick and solve the problem?
Post #498725 31st Jan 2016 5:24pm
View user's profile Send private message View poster's gallery Reply with quote
Coolcamper55



Member Since: 22 Apr 2010
Location: Inverclyde
Posts: 45

Scotland 2007 Defender 110 Puma 2.4 XS CSW Santorini Black
Combination of things I think. CHT and VCV changed and its looking positive. When I get the pump learn and pilot correction carried out (hopefully tomorrow) I will be more comfortable undertaking any serious journeys or towing. Tommy

110 XS TDCi
Post #498743 31st Jan 2016 6:10pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums