 | Home > In Car Electronics > Using a heated seat switch for reverse camera.... |
 
|
|
|
| mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900  |
I have a spare heated seat switch which I have a new head attached to from a discovery just to have a different symbol.. Anyway I want this switch to trigger the reverse camera, anyone suggest what way I need to wire the switch.??
Thanks Andy 2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html |
||
13th Oct 2015 6:24pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611  
|
Puma heated seat switch?
If so: 1 12V in 2 illumination 12V 3 not connected 4 12V out 5 ground  1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
13th Oct 2015 6:55pm |
|
| mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900 |
Thanks Martin,
Yes Puma switch.... What could i use for 1 and 2?? Can i just tap into the wires to a heated seat switch? Andy 2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html |
||
|
13th Oct 2015 7:19pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611
|
Yes if the current draw you are taking is small
 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
13th Oct 2015 7:25pm |
|
| mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900 |
Understand, so really I would be better to take the 12v in from the battery? Rest ok from the other switch? Andy
2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html |
||
|
13th Oct 2015 7:33pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611
|
What is it powering? You say a reverse camera so presumably you can find out the current draw?
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
13th Oct 2015 8:45pm |
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309 
|
For a reverse camera, the cigarette lighter is also an option - it has a 20A fuse I believe
|
||
|
13th Oct 2015 9:00pm |
|
| mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900 |
Yup, will look it up when it arrives tomorrow, just an Alpine rear camera that I want to be able to fire up with reverse or the switch... Andy
2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html |
||
|
13th Oct 2015 9:00pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611
|
Heated seats are 20A too.
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
13th Oct 2015 9:06pm |
|
| Dave Bellis Member Since: 21 May 2014 Location: Shrewsbury Posts: 133 
|
What is the maximum current that a seat heat switch YUF500150LNF contacts can carry?
|
||
|
13th Oct 2015 9:41pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611
|
The pair of seats are fused at 20A, so I wouldn't be putting more than 5A through one of these switches.
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
14th Oct 2015 8:02am |
|
| Dave Bellis Member Since: 21 May 2014 Location: Shrewsbury Posts: 133
|
Slight side issue, I was thinking of switching about 2 amps through one of these switches just wondered about the contact current rating?
|
||
|
14th Oct 2015 8:16am |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6611
|
Last time I checked, 2 is less than 5
 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
14th Oct 2015 8:23am |
|
| ken Member Since: 18 Aug 2009 Location: Banging Birds with my bitches !! Posts: 4328
|
 no  |
||
|
14th Oct 2015 8:56am |
|
| mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900 |
the power consumption is rated <2.5 watts so think i should be ok...
Andy
2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html |
||
|
14th Oct 2015 9:59am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
