 | Home > Puma (Tdci) > 110 rear springs specifications |
 
|
|
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069  
|
there you go ... makes the car almost level (still slopes forward a little)  Click image to enlarge |
||
24th Nov 2010 3:41pm |
|
| MK Member Since: 28 Aug 2008 Location: Santiago Posts: 2416  
|
Can barely see any difference.
 Puma 110" SW
............................................................. Earth first. Other planets later |
||
|
24th Nov 2010 4:27pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8032  
|
i know the only difference between the white/green/green (110 SW) and the brown purple (110 USW) is the free length
CSW RHD 110 7 Seat (3050kg) RKB500300 White/green/green 422.96mm RHD 110 Utility RKB101111 Purple/Brown 409.96mm Only difference between the 2 springs is free length All other figures are identical for coil diameter, wire diameter, rate1, 2 & 3, total coils... RKB101111 409.96 RKB500300 422.96 Cheers James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
24th Nov 2010 9:55pm |
|
| szracer Member Since: 10 Oct 2010 Location: Cotswolds Posts: 356 
|
Surely this can't be right? So they're the same, but the longer RKB500300 is softer?
Looking around the web, and in particular at a photo of the brown/purple springs, they appear to be a dual rate spring?
I'm looking at softening up the rear of my 110 USW. Am I wasting my time, then, with the RKB500300 springs (which incidentally have just ordered, although could cancel if in time)? I'm really confused (as usual!  ) now...
2010 110 XS USW (the slow one) 1960 Alfa Romeo Giulietta SZ (the fast one) 2005 Ducati ST3 1954 Sunbeam S8 |
||
|
25th Nov 2010 11:57am |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8032
|
i was only stating what i knew for fact from LR. Cheers James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
25th Nov 2010 8:23pm |
|
| szracer Member Since: 10 Oct 2010 Location: Cotswolds Posts: 356
|
Hi James,
Wasn't questioning your statement - Just expressing my own confusion!
Still not sure - But will take a photo of the two spring types next to each other when I pick them up on Monday. If the worst comes to the worst I guess I can take them back to the dealer. My 110 is due to go to local garage next week. Hoping that with the new Bilsteins I have, plus softer rear springs, thr harsh ride will be reduced, and my wife will be happy! 
2010 110 XS USW (the slow one) 1960 Alfa Romeo Giulietta SZ (the fast one) 2005 Ducati ST3 1954 Sunbeam S8 |
||
|
25th Nov 2010 9:46pm |
|
| szracer Member Since: 10 Oct 2010 Location: Cotswolds Posts: 356
|
OK, so got my RKB500300s today.
Here's a photo of one (excuse the crap iPhone photo): Click image to enlarge and here's one of the Brown/purple springs, as fitted to 110s as standard now.
Different? You tell me! 
FYI, the length of the RKB500300s (as measured by me) is 424mm. Hmm.......
2010 110 XS USW (the slow one) 1960 Alfa Romeo Giulietta SZ (the fast one) 2005 Ducati ST3 1954 Sunbeam S8 |
||
|
1st Dec 2010 10:05pm |
|
| jake Member Since: 07 Aug 2010 Location: Melbourne Posts: 7  
|
G'day Everyone,
Did we get the springs resolved. I have the Green/Green/White and would like to go a lttile firmer on the the rear. Any ideas what to use. No intention of raising vehicle. Jake |
||
|
17th Dec 2010 6:07am |
|
| MK Member Since: 28 Aug 2008 Location: Santiago Posts: 2416
|
NRC6904&NRC6389 HD for 110". Driver and passenger side. Puma 110" SW
............................................................. Earth first. Other planets later |
||
|
17th Dec 2010 9:24am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
