↓ Advertise on Defender2 ↓

Home > Technical > Passenger side lights and dash lumination not working
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Passenger side lights and dash lumination not working
connected a trailer to the electric socket on the tow bar and lost the function of the rear light, brake and front side light all on the passenger side. I have also lost the lumination of the dash too Shocked

Main beam works passenger side and I have checked the fuses and all seams ok, I am not too electrical minded, any suggestions on what to check or where to look for the fault Question Big Cry

TACK
Post #46573 28th Nov 2010 9:22pm
View user's profile Send private message View poster's gallery Reply with quote
AndrewS



Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707
United Kingdom 2013 Defender 130 Puma 2.2 SW Rimini Red
Have you checked the fuses under the drivers seat 130's have feeling's as well you know Smile
Post #46574 28th Nov 2010 9:26pm
View user's profile Send private message View poster's gallery Reply with quote
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Yes bud, went there first as I knew each light will have it own fuse and this must be a master fuse or something to knock the lot out Confused
Post #46576 28th Nov 2010 9:34pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5711
2006 Defender 110 Td5 USW Zermatt Silver
Have you removed the trailer?

Any better/different?

Andy
Post #46578 28th Nov 2010 9:38pm
View user's profile Send private message View poster's gallery Reply with quote
Peter Td4



Member Since: 23 Oct 2010
Location: Antwerp, Belgium
Posts: 228
Belgium 2008 Defender 110 Puma 2.4 HCPU Santorini Black
I've had this problem too on my Td5 Embarassed.
It was a fuse in the separate fusebox under the dashboard.
Unfortunately I don't remember which one. Peter,

Defender 110 StaWa - Td5
Defender 110 HCPU - Puma
Defender 90 Soft Top - Td5
Post #46579 28th Nov 2010 9:40pm
View user's profile Send private message View poster's gallery Reply with quote
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Andy, Disconnected the trailer electrics straight away and the lights stayed off. Turned the vehicle off, locked it, unlocked it and the lights remain dead, been like it for 24hrs now. Probably did not need to do that but things like that always worked in my d3 Laughing

Peter, mines a puma, so dont know if this would be different or where this suspect fuse could be located Question
Post #46582 28th Nov 2010 9:46pm
View user's profile Send private message View poster's gallery Reply with quote
alantd



Member Since: 14 Dec 2008
Location: Northamptonshire
Posts: 1513
United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Tonga Green
Definitely sounds like a fuse to me.

I can't think which one off the top of my head. I'll have a look tomorrow. One that started out as a 2.4 TDCi 110 XS
+ New Defender 110 First Edition
Post #46587 28th Nov 2010 10:16pm
View user's profile Send private message View poster's gallery Reply with quote
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Cheers Alan Thumbs Up
Post #46605 29th Nov 2010 8:20am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17391
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Fuse F18 in the main fuse box (under the steering column) protects the NS side & tail lights

Fuse F13 in the main fuse box (under the steering column) protects the brake lights (both sides)

Instrument illumination is not specifically listed on the fuse spec but could well be off F18 too.

There is no single fuse the failure of which could cause all the symptoms you describe!
Post #46609 29th Nov 2010 9:35am
View user's profile Send private message View poster's gallery Reply with quote
Lorryman100



Member Since: 01 Oct 2010
Location: Here
Posts: 2686
I use one of these to check trailers electrics before connecting to landy, you can also check vehicles wiring as well Thumbs Up

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...616wt_1135
Post #46629 29th Nov 2010 12:50pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
alantd



Member Since: 14 Dec 2008
Location: Northamptonshire
Posts: 1513
United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Tonga Green
blackwolf wrote:
Fuse F18 in the main fuse box (under the steering column) protects the NS side & tail lights

Fuse F13 in the main fuse box (under the steering column) protects the brake lights (both sides)

Instrument illumination is not specifically listed on the fuse spec but could well be off F18 too.

There is no single fuse the failure of which could cause all the symptoms you describe!


Wot he said Thumbs Up One that started out as a 2.4 TDCi 110 XS
+ New Defender 110 First Edition
Post #46650 29th Nov 2010 5:34pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
Odd failure, as the brake lights are fused as a pair (Fuse 13 as above) Confused Maybe it's a coincidence and the LH brake light bulb has blown?

The LH side lights are fused separately from the RH, and are via Fuse 18 as above.

Have you lost the speedo illumination and the switch/control illumination - or just one?

Switch/control illumination is Fuse 20, speedo illumination is via LH side lights feed - so Fuse 18.

These are all in the steering column fuse box not under the seat.  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #46655 29th Nov 2010 6:50pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
TACK



Member Since: 26 Apr 2009
Location: Essex
Posts: 1045
 
Cheers Martin.

Pulled all the fuses out last night, i mean every single one with very cold hands. none of them blown, gave up and surrendered to the comfy living room. Set off this morning, err dash lights are working Shocked got out, all lights working. Did not test the lights last night after I pulled them all out. Losse fuse Question not really as I had pulled the relevant fuses out (F18 and F13) the day before and did not work.

Will keep an eye on it but seams back to normal with no expanation Confused

Thanks for your help guys Thumbs Up
Post #46744 30th Nov 2010 1:13pm
View user's profile Send private message View poster's gallery Reply with quote
X4SKP



Member Since: 29 Nov 2013
Location: Berkshire
Posts: 2295
United Kingdom 2010 Defender 90 Puma 2.4 SW Stornoway Grey
Hello All

I had exactly this issue today...(checking the 90 as MOT tomorrow... Shocked )

Also Rear Number Plate Bulbs (X2 blown)... hopefully separate issue.

Searched on D2N, found a similar issue here...which made me worried initially... Exclamation
http://www.defender2.net/forum/topic28957....ts+working
as I have installed a OEM Land Rover 13Pin Towing Loom 3 months ago but to-date
without issue.

Arrived at this thread, and Fuse F18 is the culprit so a simple fix...
feeling like it can't be that easy can it... Question

Off to buy Number Plate Bulbs and a Spare Box of Fuse's.

Thanks D2N, it's like having your own mechanic... Thumbs Up SKIP
https://www.defender2.net/forum/topic83242.html
Post #461511 8th Oct 2015 9:11am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums