DEFENDER2.NET - View topic - No hazards or indicators

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > No hazards or indicators

Page 1 of 1

Print this entire topic ·

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

No hazards or indicators

Thought this was going to be simple but I can't (easily) locate the indicator relay.

Any advice please - it's an 06 90

Thanks
Gavin

6th Jan 2015 7:03pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20413

Is the connector / plug on the rear of the hazard switch securely connected?

6th Jan 2015 7:04pm

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

Didn't even think of that Steve - is that a likely cause ?

Does the hazard switch just unclip,or is there a knack to it ?

Thanks

6th Jan 2015 7:07pm

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 724

2008 Defender 130 Puma 2.4 HCPU Alaska White

If it isn't that, think the relay is in the dash behind dials, only a few screws to get binnacle off...! Mine went on my 04 dc and it was there...

Cheers. Alex

6th Jan 2015 7:51pm

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 724

If it isn't that, think the relay is in the dash behind dials, only a few screws to get binnacle off...! Mine went on my 04 dc and it was there...

Cheers. Alex

6th Jan 2015 7:52pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20413

I know that on the Puma if the hazard light switch is removed the indicators won't work or the hazards obviously.
This is why I mention that maybe it's loose or not fully connected.
It in-clips from behind by two metal tangs, I'd have thought the TD5 wouldn't be too much different.
Failing this it might well be the relay.

6th Jan 2015 8:18pm

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

Thanks Steve and Alex - job for tomorrow.

Gavin

6th Jan 2015 8:22pm

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

How on earth do you remove the central switch panel - obviously the two screws under the panel but how is the top connected to the underside of the dash ?

Thanks
Gavin

8th Jan 2015 3:56pm

Paddie42

Member Since: 24 Apr 2014
Location: Hamphire
Posts: 230

There are 3 screws that hold it in place under the Dash. You have to either remove the dash, or loosen it enough to see them.

the 3 screws only need to be undone slightly and then it will slip out.

8th Jan 2015 4:05pm

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

.

Thanks Paddie - I was hoping it wouldn't involve the dash.

Sorry for my ignorance but where are those 3 screws located.

Thanks again

Gavin

8th Jan 2015 4:12pm

Paddie42

Member Since: 24 Apr 2014
Location: Hamphire
Posts: 230

Just been looking on the wibbly wobbly web and found this;

http://www.reedx.net/landrover/mods/2002da...e_diag.gif

You can see (hopefully) three lugs on the console. That is where the screws are

Hope this helps.

8th Jan 2015 4:26pm

gavinpm

Member Since: 19 Oct 2012
Location: Wiltshire
Posts: 117

Great.

Thanks very much Paddie, been searching for such a diagram myself without success.

8th Jan 2015 4:49pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum