DEFENDER2.NET - View topic - RDX LED relay it does what it says on the tin!!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > RDX LED relay it does what it says on the tin!!

Page 1 of 2

Print this entire topic ·

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5110

2007 Defender 90 Other CSW Trident Green

RDX LED relay it does what it says on the tin!!

Just fitted the RDX relay from Bolt On Bits.
Since I fitted LED indicators I have struggled with several LED flasher relays including the WIPAC one and a relay from Mobile centre, but I could not get the trailer warning light to stop flashing every time I indicated without a trailer attached.

So I finally went for the RDX one, result no more trailer warning light flashing when no trailer attached, but flashes when a trailer is attached. Also a nice little clicking warning sound and indicators flashing at the right speed.

23rd Aug 2014 1:33pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20343

I've got the same no complaints.

One tip though, adjust with the engine running not with just the ignition so that the voltage is higher.
This way you get the quickest possible flash rate but with the trailer light off.
If you do it with just the ignition on it'll seem right but when the motor is running the trailer light will start coming on.

23rd Aug 2014 2:23pm

dondiddy

Member Since: 13 Nov 2012
Location: Hamilton
Posts: 224

Just wish they did a 24volt version! I have the Mobilecentre one fitted at the moment and I don`t like the flash rate as it`s very slow. Also does not have the trailer light function which I want so will probably end up fitting an original Landrover flasher unit and some resistors.

23rd Aug 2014 6:58pm

Buccaneer

Member Since: 11 May 2014
Location: London/Kabul
Posts: 148

1998 Defender 90 V8 Petrol 50th Auto Atlantis Blue

Sadly for us 50th's owners a total b*****d to fit as we have to remove shed loads of things and skin knuckles to get to where the relay fits. The Rules:-
1 Buccaneer comes back alive.
2 Chicks dig scars.

GB260

23rd Aug 2014 7:39pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2227

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

Why is it more difficult ? Do you have a different dash ?
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

24th Aug 2014 4:43am

Buccaneer

Member Since: 11 May 2014
Location: London/Kabul
Posts: 148

The flasher relay is buried under the transmission tunnel behind where the other relays are and this needs to be removed for access to this one relay. The Rules:-
1 Buccaneer comes back alive.
2 Chicks dig scars.

GB260

24th Aug 2014 6:15am

bpman

Member Since: 21 May 2008
Location: Oslo
Posts: 8069

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

I have the mobilecentre relay fitted and it works flawlessly

I will be fitting LEDs to my off-road trailer

24th Aug 2014 6:19am

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2227

Buccaneer wrote:
The flasher relay is buried under the transmission tunnel behind where the other relays are and this needs to be removed for access to this one relay.

Ah, I see, that explains it then ☺
Thanks
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

24th Aug 2014 12:19pm

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5110

bpman wrote:
I have the mobilecentre relay fitted and it works flawlessly

I will be fitting LEDs to my off-road trailer

Will you ned to fit load resistors to your trailer lights
The trailer must be using incandescent bulbs or LED lamps with load resistors for the Trailer light to flash. It cannot detect trailers solely on LED lamps it will make them flash ok but will not flash the trailer light as the extra load is too little to detect.

I do not know of a relay that will 'see' LED lights on a trailer and light up the warning light, although the RDX relay will flash the trailer lights it will not light up the warning light, but I suppose you could live with that.

24th Aug 2014 12:44pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20343

Your not supposed to tow with it not working though I think.
Most likely would need load resistors indeed. But depends on the resistance.

24th Aug 2014 2:23pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

or fit a buzzer and forget about the dash light

mine (buzzer) works with leds or bulbs (have trailers with both)

cant see the point in leds with resisters

24th Aug 2014 4:34pm

gilarion

Member Since: 05 Dec 2013
Location: Wales
Posts: 5110

I cannot see the point with resistors either nor that some people put a 20 Wat bulb into the circuit

24th Aug 2014 6:09pm

ken

Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328

Buccaneer wrote:
The flasher relay is buried under the transmission tunnel behind where the other relays are and this needs to be removed for access to this one relay.

Tis a easy job however now that I have fitted a proper head unit and heated seats it will take a little longer to remove

25th Aug 2014 2:31am

bpman

Member Since: 21 May 2008
Location: Oslo
Posts: 8069

I was going to test first with a led tailboard

I'm not worried if the dash light illuminates

Thanks for the heads up

25th Aug 2014 9:02am

ken

Member Since: 18 Aug 2009
Location: Banging Birds with my bitches !!
Posts: 4328

Just follow the instructions to the T it works a treat

25th Aug 2014 9:05am

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum