 | Home > Maintenance & Modifications > Axle stands |
 
|
|
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558  
|
if you want to get under land rover while on stands I would not go for folding , the legs are very thin metal and I have seen one buckle
I have been under a land rover laying flat on my back when a land rover (discovery) somehow went side ways and came off the axle stands , it was on four stands but were at full extension , the gearbox cross member bounced down as it landed on the floor just touching my chest ,luckily all 4 wheels were still on it , if no wheels it would have been a different story it was one of them moments went it all seems to move slowly and you think "mmm is this it " yes they were folding ones but heavy duty ones my advice is go for solid ones with a wide base and longer then you need , and don't go full extension (it makes the stem loose in the tubes |
||
10th May 2014 5:15pm |
|
| kipperthedog Member Since: 27 Jun 2013 Location: Down South Posts: 403 
|
Thanks....
 ....I have gone off the idea of folding ones already! |
||
|
10th May 2014 5:20pm |
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558
|
I still got the offending stands if you want them cheap
couple them have slight kink in the stem!!! funny they not been used lately |
||
|
10th May 2014 5:24pm |
|
| mark_d Member Since: 07 Sep 2013 Location: Northern Ireland Posts: 266 
|
I bought these recently: http://www.halfords.com/webapp/wcs/stores/...;langId=-1 http://defender90xs.blogspot.co.uk/
|
||
|
10th May 2014 5:28pm |
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309 
|
Have a look here - I'm tempted to get some stands form here
http://www.sgs-engineering.com/hydraulic-jacks/axle-stands |
||
|
10th May 2014 5:31pm |
|
| jimbob7 Member Since: 06 Jul 2013 Location: uk Posts: 2055 |
I bought 3 ton ratchet stands off the bayE for about £20 delivered, but you can get the same generic ratchet stands in Costco fer £20. Pov.spec,ftw. 2006, 110,TD5.
|
||
|
10th May 2014 5:46pm |
|
| gilarion Member Since: 05 Dec 2013 Location: Wales Posts: 5111  
|
Bought these from Machine Mart fantastic quality and have never let me down strong as a tank
3 Ton £22.19 http://www.machinemart.co.uk/shop/product/...xle-stands 6 Ton £35.98 http://www.machinemart.co.uk/shop/product/...xle-stands |
||
|
10th May 2014 5:50pm |
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309
|
Is that 3 tonnes each stand or for the pair?
|
||
|
10th May 2014 5:50pm |
|
| kipperthedog Member Since: 27 Jun 2013 Location: Down South Posts: 403
|
Yeah thanks Munch...I think I'll pass....
 .
The Halfords ones and sgs ones look up to whatt I want...and I hadn't thought of machine mart! Thanks all. |
||
|
10th May 2014 5:56pm |
|
| jimbob7 Member Since: 06 Jul 2013 Location: uk Posts: 2055 |
3 ton per pair. Pov.spec,ftw. 2006, 110,TD5. |
||
|
10th May 2014 6:54pm |
|
| Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1749 |
I've had Halfords ones for years.
DO NOT USE FOLDING ONES or RATCHET ONES |
||
|
10th May 2014 7:14pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 
|
Opie oils (site sponsor) have an offer on all axle stands at the moment and with the forum discount you may pick up a bargain
 |
||
|
10th May 2014 7:19pm |
|
| kmac Member Since: 07 Oct 2009 Location: Middlesex Posts: 1309
|
How do you get the forum discount?
|
||
|
10th May 2014 7:44pm |
|
| Nobby Member Since: 09 Aug 2012 Location: Wiltshire Posts: 444 
|
I got mine from SGS and they are well made and have been using them recently to swap the springs over. _______________________________ Puma Defender 90 |
||
|
10th May 2014 7:46pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
