DEFENDER2.NET - View topic - Bolt on bits RDX LED lights......

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Bolt on bits RDX LED lights......

Page 4 of 4

Print this entire topic ·

abiffen90

Member Since: 14 Nov 2013
Location: Gloucestershire
Posts: 17

If it was the fuse, would it not suggest the tails wouldn't work either? Thanks for your help, im a student so i spend a lot of time away from my land rover. Making it difficult to make any sort of progress on things like this hahaha.

10th Dec 2013 6:03pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20285

I'm not entirely sure to be honest off the top of my head.
Bear in mind the tails are on with sidelights and brake lights only when you brake so different switches and perhaps fuses.
The sidelights and tail could be fused as one and the brake on its own. The brake on incandescent (standard bulb) is higher wattage than the tail light.
Tail is 5w and brake 21iirc. âï¸âï¸God Bless the USA ðŸ‡¬ðŸ‡§ðŸ‡ºðŸ‡¸ âï¸âï¸

10th Dec 2013 6:08pm

dondiddy

Member Since: 13 Nov 2012
Location: Hamilton
Posts: 224

Looking at the back of the plug from the RDX light (with the groove in the plug to the top) you should have left to right Black (Earth) Green (Brake) and Red (Tail light) Brake light circuit is fused seperately from side/tail lights so most likely this has blown causing the problem.

10th Dec 2013 6:52pm

abiffen90

Member Since: 14 Nov 2013
Location: Gloucestershire
Posts: 17

Thats great, thanks a lot. I'll see how this goes and let you know.

10th Dec 2013 6:56pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20285

Dondiddy - I'm glad you clarified that, I thought it was on a separate circuit but wasn't going to say explicitly as I couldn't guarantee it.

Looks like that is the likely issue, just check the wires are correct as you mention and then the fuse. âï¸âï¸God Bless the USA ðŸ‡¬ðŸ‡§ðŸ‡ºðŸ‡¸ âï¸âï¸

10th Dec 2013 7:12pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20285

Well I've got the sidelights and brake lights from BoB now.

Also XS side repeaters to go clear on the front.
Not going to fit yet though.
Need the indicators and relay.
Thinking clear indicator on the front and amber rear. Also red brake lights for me.
I'm tending yo think of doing the double fog and reverse mod but going clear with the fog lights.
Makes things look a little more even and more light to boot.
Anyone got the same as this? âï¸âï¸God Bless the USA ðŸ‡¬ðŸ‡§ðŸ‡ºðŸ‡¸ âï¸âï¸

12th Dec 2013 5:33pm

rustyboxx

Member Since: 08 Oct 2012
Location: Poole
Posts: 548

2015 Defender 90 Puma 2.2 CSW Montalcino Red

I had a full set of LED lights from BoB on my 90 and they were great, no issues with them at all. Sadly, they stayed on thé 90 when I sold it.

However, I've just bought a set of 8 Wipac clear lens LED's from Simon at MPS Trading and I must admit they look better than the coloured lenses from BoB. The LED arrangement looks different and better in my view.

I've got clear lens fog and reverse to go on yet to complete the look.

As always Simon's customer service is excellent and the product is great. Well chuffed

2015 90 XS CSW TDCi - Beautiful
2007 110 XS DCPU - An itch that needed scratching
2005 90 Td5 XS CSW - Utterly brilliant
2001 Discovery 2 ES Auto - A phase I went through
1996 90 Tdi CSW - Uber reliable
1989 90 2.5 Petrol Hardtop - My first proper Landy
1985 Range Rover Vogue V8 -Troublesome

12th Dec 2013 5:46pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20285

Simon is good, when I get around to getting my Dynamat for the front hopefully in Jan he will get my order.

P.s. If you want to pop by one day in the new year your still welcome too.

âï¸âï¸God Bless the USA ðŸ‡¬ðŸ‡§ðŸ‡ºðŸ‡¸ âï¸âï¸

12th Dec 2013 5:48pm

XS Pete

Member Since: 13 Jan 2011
Location: Suffolk
Posts: 632

2011 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Quote:
I've just bought a set of 8 Wipac clear lens LED's

I also went for clear Wipac LED rear stop/tail units. Shape-wise they are identical to the original LR design which is what I wanted, and having closely compared them with the others that are available, the quality is very impressive, particularly given the price.

I really don't like any of the stuff RDX do. The quality is sometimes dubious, and their prices are ridiculous for what you're actually getting.

Pete

13th Dec 2013 11:33am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20285

To be fair also, from what I have seen and had all makes can be of dubious quality including Le Perie and Wipac especially the former.
Can't beat my "LEP England" indicators at the moment, they have condensation in them all the time.
Even dried them out fully once and a day or two later back to square one,

âï¸âï¸God Bless the USA ðŸ‡¬ðŸ‡§ðŸ‡ºðŸ‡¸ âï¸âï¸

13th Dec 2013 11:57am

Page 4 of 4

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum