 | Home > Puma (Tdci) > Cylinder Head Cover.... liftoff ! |
 
|
|
|
| K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610   
|
 This issue has been the subject of much historical debate.....
Using 'Pot Noodle' as searchword.... http://www.defender2.net/forum/topic5895.h...pot+noodle http://www.defender2.net/forum/topic4005.h...pot+noodle If you go through life with your head in the sand....all people will see is an ar5e!! Treat every day as if it is your last....one day you will be right!! |
||
2nd Jul 2013 9:05am |
|
| 238kirk Member Since: 03 Nov 2012 Location: Doncaster Posts: 233 
|
There's nothing on my 2.2 transit either
|
||
|
2nd Jul 2013 11:25am |
|
| dorstsmith2 Member Since: 06 Aug 2012 Location: On the third rock from the sun in dorset Posts: 188 
|
sign of the times 'Pot Noodle' holder under the hood. in the past land rover front rad grills used as BBQ grill
 |
||
|
2nd Jul 2013 2:17pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4660 
|
Don't forget to remove your mug when finished messing about in the engine bay, as it stops the bonnet from closing.....or so I've been told.  1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
|
2nd Jul 2013 4:34pm |
|
| theorangebandit Member Since: 03 Jun 2013 Location: Stowmarket Posts: 862 |
I didn't know there was a cap for that hole. Mine is as yours is in the pic. I have used it to store spammers while under the bonnet.
|
||
|
2nd Jul 2013 5:10pm |
|
| Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3471 
|
Those bloomin' spammers get everywhere Steve.
Owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
|
2nd Jul 2013 6:18pm |
|
| Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298  
|
Chris,
you're welcome. had a few of those missing on mine - hence I noticed. |
||
|
2nd Jul 2013 8:33pm |
|
| Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298
|
in fact looking at it again you appear to have at least 2 bolts missing.
2 missing bolts = rattle.  |
||
|
2nd Jul 2013 8:34pm |
|
| growbag_the_pirate Member Since: 27 Nov 2013 Location: South West Posts: 2
|
I rang my local useful dealership (as I'd only had my beast for a week and it was the first time I'd really looked under the bonnet properly) who were a bit clueless until I quoted the Microcat part number (LR006031 / 14 quid or thereabouts) and amidst a flurry of fawning over slightly irate customer have sent me one gratis, and quite rightly so. Am still clueless as they were as to the purpose of the aperture/cover and whether there should be something else in there (like a filter?) as other vehicles I've owned with a crankcase breather usually have an associated filter...
|
||
|
27th Nov 2013 4:04pm |
|
| nickhodgson Member Since: 08 Dec 2009 Location: Zambia Posts: 174 
|
I would be much more worried about the coolant leaking out of you expansion tank cap! 1995 300tdi Defender 90 P/UP
2011 Puma Defender 130 D/C 2000 300tdi Defender 110 P/UP 2015 Discovery 4 SDV6 HSE |
||
|
29th Nov 2013 9:00am |
|
| smb Member Since: 15 Jan 2013 Location: Cheshire Posts: 1232 
|
Many years ago whilst at LandRover I'm pretty sure an Assembly Engineer told me that when Ford were feeling a bit "Flush" the Engine Suppliers/Assemblers included this as a Filter Removal Tool as it was the only non standard tool needed to undertake a service. Then they realised they could save a couple of quid by not including it as more manufacturers move away from designs that allow owners to self service. Since then I just assumed that is what it was and find it has far more important uses like K9F says.
|
||
|
29th Nov 2013 9:25am |
|
| K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610
|
Dgardel actually went to the trouble of sourcing the 2.2 engine cover, adapting it he fitted it to his 2.4.
http://www.defender2.net/forum/topic8633.html If you go through life with your head in the sand....all people will see is an ar5e!! Treat every day as if it is your last....one day you will be right!! |
||
|
29th Nov 2013 10:12am |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
^^ never saw any photos of it fitted
|
||
|
29th Nov 2013 10:22am |
|
| K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610
|
Patience, if he's done it photos on way! Just 'pm'd him as I have interest too!
If you go through life with your head in the sand....all people will see is an ar5e!!
Treat every day as if it is your last....one day you will be right!! |
||
|
29th Nov 2013 10:43am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
