 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101   
|
took my mates, my old, 88" 300 tdi trialer tp an awdc trial today. 110 towed it a dream and my brians james trailers a great piece of kit. rolled it at half time though
 its fine |
||
3rd Feb 2013 5:41pm |
|
| d j hutton Member Since: 30 Jul 2009 Location: Dorset Posts: 1044 
|
At long last got around to fitting Safari-Equip bumperettes to the 110 time, weather etc hampered fitting before now.
Thanks to the long suffering Brendan for both supply and follow up with fitting bolts
Quite an easy fitment (bit more fiddly on the exhaust side though) Had to fit a 5mm nylon spacer to the outboard sets of bolts so they sat in line with the bodywork (not quite enough allowance for the curve in the crossmember unfortunately) Looks like either the cross member or the bumperettes holes are going to need a little bit of 'adjustment' as they don't sit quite level, but thats for another time - ran out of daylight. Looks like these are a decently made bit of kit and also MADE IN ENGLAND so all good. Before and after pics.  Click image to enlarge Click image to enlarge Click image to enlarge DJ 1989 200tdi 90 csw 2011 110 usw Orkney grey Buy British 🇬🇧 Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html |
||
|
4th Feb 2013 10:06am |
|
| macduff Member Since: 04 Nov 2012 Location: NE Posts: 119 
|
Dropped the 110 off for some remedial work, heater fan only working on 3 and hi level brake light out, the latter seems to be an open circuit on the switched 12 volts as it enters the lamp. Asked for warrenty to cover (extended LR warrenty) but the dealer said they'd have to liase with warrenty co to confirm :/ . Freelander 2 courtesy car is a bit Meh too. maybe too car like for my tastes with a very confusing wiper switch arrangement. 2023 110 P400e
|
||
|
4th Feb 2013 10:41am |
|
| JWL Member Since: 26 Oct 2011 Location: Hereford Posts: 3443 
|
Just noticed that on the above bumperette fitting pictures that the rear cross member hasn't got the allen key headed bolts on the ends which foul the fitting of the bumperettes. I take it that the offending bolts are something to do with seat belt mountings as mine is a Station Wagon and DJ Huttons is a Utility Station Wagon thus no seats.
|
||
|
4th Feb 2013 10:50am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Yes, they secure a large tubular bracket that goes to the underside of the wheelbox to which, in turn, the seat belt brackets are fixed to. You can see it on the left of this picture:
Click image to enlarge I keep meanign to remove them from mine as I no longer have rear seats, but it's one of those jobs that involves crawling around underneath struggling with rusted bolts, so it's not very appealing  Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
4th Feb 2013 11:13am |
|
| foxkilla Member Since: 01 May 2009 Location: J23 M1 Posts: 156 
|
Finally got round to fitting my CSK drl bumper and some 30mm wheel spacers.
Must say I am extremely pleased with the drl's, very easy to fit and wireup.
Click image to enlarge Click image to enlarge |
||
|
4th Feb 2013 11:13am |
|
| JWL Member Since: 26 Oct 2011 Location: Hereford Posts: 3443
|
Cheers Darren, one of these days I may get round to modifying my bumperettes, one side where I've left a seat in, the other side I might just take out the offending bracket where it's no needed.
"Might" being the operative word  |
||
|
4th Feb 2013 11:34am |
|
| fekete Member Since: 24 Dec 2008 Location: Here on the other end of the computer Posts: 3626 
|
Winched a Transit Luton of a field.....went past at 4pm and there was 6 guys trying to push it
front wheels was well bedded in.....came back that way at 4.30 still in the same place  within 5 mins they was on there way  NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY |
||
|
5th Feb 2013 4:51pm |
|
| mick Member Since: 08 Feb 2010 Location: Yorkshire Posts: 2109 
|
Assisted a transit & renault van + a Volvo in quensburry this aft in white out conditions
|
||
|
5th Feb 2013 5:30pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 
|
Looks spot on, glad your happy CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
5th Feb 2013 6:32pm |
|
| Undergroundfrog Member Since: 27 Jan 2013 Location: Herts Posts: 31 
|
Fitted a new original rubber liner for the back, the only reference from LR was the old shape style, luckily it fits perfect.
|
||
|
5th Feb 2013 9:28pm |
|
| Welshsurferdude Member Since: 23 Feb 2012 Location: Newport Posts: 2419 
|
Looks great foxkilla
 2008 Santorini Black 110 XS USW (Sold)
2015 Discovery 4.5 Black pack Firenze red XS 2008 Corris Grey 110 XS USW (sold) 2011 Santorini Black 110 XS USW (Sold) |
||
|
5th Feb 2013 9:30pm |
|
| WarPig Member Since: 04 Dec 2009 Location: Sheffield Posts: 1748 
|
Swapped my single pin Dixon Bate slider to a double pin. Stops it rocking when towing..
Click image to enlarge Click image to enlarge Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
6th Feb 2013 11:59am |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6678
|
Where did you get that from, I need to do mine, the clonking really irritates !
|
||
|
6th Feb 2013 12:26pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
