DEFENDER2.NET - View topic - Trying to understand the gear stick rattle

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Trying to understand the gear stick rattle

Page 2 of 2

Print this entire topic ·

Harryb450

Member Since: 11 Dec 2011
Location: over yonder
Posts: 283

2011 Defender 110 Puma 2.4 USW Santorini Black

Cracka wrote:
Thanks WelshGas,

Can you or somebody else enlighten me as to how I go about doing this fix

Do I need to remove the complete rubber floor mat around the tunnel or does the rubber gaiter pull up some how? I don't want to go busting and tearing at things blindly.

How do I remove the gear stick itself, or do I need to, to complete the fix.

Hope you don't mind the questions but it's easier to ask someone who has already done it.

Thanks in advance.

Mick.

if you pull the gaiter down towards the tunnel, you will see 2 plastic clips on the gear stick, if you ease both of these the stick will pull upwards and off

the all i did was put glue around the platic carrier bit that holds the weights.

NO ROAD..........EXCEPT FOR LANDROVER

26th Jan 2013 3:20pm

WelshGas

Member Since: 01 Oct 2010
Location: Vale of Glamorgan
Posts: 935

2010 Defender 90 Puma 2.4 XS CSW Santorini Black

Check this topic out. http://www.defender2.net/forum/topic14184....sfer+lever. See the post from K9F, 4 th post down.

LANDYWATCH

Neighbourhood Watch for Land Rover Owners

http://www.landywatch.co.uk/smf2/index.php

26th Jan 2013 3:22pm

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Thanks for the replies Harry and Welsh

I knew you guys would steer me in the right direction, I'll have a crack over the next day or so and see how it goes, thanks again.

26th Jan 2013 11:43pm

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Thanks for the replies Harry and Welsh

I knew you guys would steer me in the right direction, I'll have a crack over the next day or so and see how it goes, thanks again.

26th Jan 2013 11:53pm

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Well that was bloody easy once you know how

My weights were definitely loose, I could replicate my 'teeth chattering' noise by just shaking the gear stick and hitting it on my palm. A few drops of super glue and put it back in, the most difficult part was stretching the gaiter back in place

I'll give it a test tomorrow and report back.

I did snicker when I saw the Ford logo emblazoned on the base of the stick

28th Jan 2013 6:27am

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Woohoo rattle gone, thanks guys.

29th Jan 2013 8:36am

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Woohoo rattle gone, thanks guys.

Just realised this double posted for some reason

I don't know how to get rid of 1 of them.

Last edited by Cracka on 29th Jan 2013 8:59am. Edited 1 time in total

29th Jan 2013 8:39am

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2038

2013 Defender 90 Puma 2.2 XS CSW Barolo Black

I'll have to to sort mine now

29th Jan 2013 8:48am

Cracka

Member Since: 08 Dec 2012
Location: New South Wales, Australia
Posts: 129

Do it Daz it literally took about 10 - 15 minutes max, the longest time was getting the gaiter back in place.

29th Jan 2013 9:01am

DAZ110

Member Since: 06 Dec 2007
Location: East Sussex
Posts: 2038

Yes, will do it

29th Jan 2013 9:06am

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum