Member Since: 19 Oct 2009
Location: County Durham
Posts: 154
Door adjustment help
When fitting my chequer plate sills today I hit a problem on the drivers side. Both doors need to go up a couple of mm to clear the plate.
As is they only just clear the normal sill especially the rear passenger door towards the back.
Question is, which part of the hinge has adjustment in, the part bolted to the door or the part bolted to the B pillar and bulk head, and are the nuts captive?
I'm sure some of you knowledgeable chaps have done this yourselves.
Cheers,
Chunk
12th Dec 2009 3:29pm
dm_td5
Member Since: 20 Jul 2008
Location: Arnhem Land
Posts: 609
I had to do all 4 doors to fit the sill checker plate
The door side of the hinge doesn't have captive nuts and the pillar side is the adjustment slot. It's a lot easier with two people.
One other thing to note is if you have a roof rack check that the re-alignment is not going to fowl the door on any gutter clamps.110 2.4TDCi
110 300Tdi
LROCV ::: AULRO.com
12th Dec 2009 11:52pm
Chunk
Member Since: 19 Oct 2009
Location: County Durham
Posts: 154
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
12th Dec 2009 11:52pm
