 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| dgardel Member Since: 30 Nov 2008 Location: Veneto (Heart & Head) Posts: 3586  
|
mhmmmm where i have seen it??? Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition
IID Pro MV License |
||
16th Dec 2012 3:00pm |
|
| Lorryman100 Member Since: 01 Oct 2010 Location: Here Posts: 2686 |
Went from this:
Click image to enlarge To this, X Eng Defend column ignition barrel shield: Click image to enlarge Brian. Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  |
||
|
16th Dec 2012 3:15pm |
|
| fekete Member Since: 24 Dec 2008 Location: Here on the other end of the computer Posts: 3626  
|
Brian is it as easy to fit as it looks ? NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY
|
||
|
16th Dec 2012 4:10pm |
|
| Lorryman100 Member Since: 01 Oct 2010 Location: Here Posts: 2686 |
It was an easy job Karlos, I have done a write up here
http://www.defender2.net/forum/post194037.html#194037 Brian. |
||
|
16th Dec 2012 4:30pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
good write up Brian, please keep us informed regarding this weeks testing
|
||
|
16th Dec 2012 5:40pm |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
Spent a good day on the Plain, very wet but hardly anyone else out there
Click image to enlarge Click image to enlarge Click image to enlarge Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
16th Dec 2012 8:27pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5829 
|
Today I had a go at replacing the rear output seal on the transfer case. Removed the prop shaft OK.
Then had fun and games removing the cross head screw holding the drum on. I had to break out the impact driver as head was starting to round off using a normal screw driver. Removed the 30mm nut using the buzz gun. Replaced the seal but think the seal is too far in, so may have to do it again! Did a tip run and washed the Landy 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
|
16th Dec 2012 8:37pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10376
|
I washed the 90 yesterday.
Got it dirty today  |
||
|
16th Dec 2012 9:56pm |
|
| Skippy R Member Since: 08 Feb 2012 Location: Yorkshire,out 'n'about Posts: 160 
|
Washed it after doing a few little jobs, don't know why as it'll rain tomorrow now ! (That was a practice for loading photo's, never done it before )  Dave
98 'S' 90 300Tdi (sold) 07 D3 HSE (now sold) 1993 Scania 143 450 (should have kept that ! ) |
||
|
17th Dec 2012 1:06am |
|
| foxkilla Member Since: 01 May 2009 Location: J23 M1 Posts: 156 
|
fitted my new lights, care of mobile centre, really pleased
Click image to enlarge |
||
|
17th Dec 2012 12:49pm |
|
| ken Member Since: 18 Aug 2009 Location: Banging Birds with my bitches !! Posts: 4328
|
Shhh dont tell Lishlandy
 |
||
|
17th Dec 2012 2:42pm |
|
| Lishlandy Member Since: 26 Oct 2011 Location: High Wycombe Posts: 941  
|
Ouch! Hahaha lets all laugh at Lish who can't join 2 wires together. Go on Lishlandy run to Uncle Ken when you can't complete a circuit.....
Although this is the new Oxford dictionary definition of 'all the gear, no idea'.  ===================================
Steve 90 xs sw in Stonoway Grey - Sold 110 USW X-TECH |
||
|
17th Dec 2012 3:00pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20193
|
At least you tried. NEVER SURRENDER! ⛽️🛢️👨🔧🧰⚙️ RED, WHITE & BOOST! 🇬🇧 |
||
|
17th Dec 2012 3:23pm |
|
| Lishlandy Member Since: 26 Oct 2011 Location: High Wycombe Posts: 941
|
Failure is a mear temporary set back to success ===================================
Steve 90 xs sw in Stonoway Grey - Sold 110 USW X-TECH |
||
|
17th Dec 2012 3:35pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
