DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 Alarm

Page 1 of 1

Print this entire topic ·

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

TD5 Alarm

Hi all, I have asked this question on AULRO and now on here as my wife uses the 90 for work and it spends a lot of time in hospital car parks.
I am curious to know if the Disco 2 motion detector can be fitted to the Defender alarm and if so are the wires to attach it in the hood lining somewhere. I know in the owner’s handbook it shows it as fitted but our 90 does not have it or the backup battery pack. The harness for the battery pack is behind the left headlight but does not apperar to ever had one fitted. any help would be appreciated.

Allan

14th Nov 2012 9:05am

jasong4110

Member Since: 18 Oct 2009
Location: Henley On Thames
Posts: 268

On my 110 the motion sensor is in the OS B Pillar it is connected from the black loom under the seat and goes through the seat box it is also connected into the central locking loom. I recently moved my ECU loom and you can see the white plug in the photo.

Jason.

14th Nov 2012 9:37am

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

Thanks for that, so that is the point of connection for the motion detector?

Allan

14th Nov 2012 11:11am

jasong4110

Member Since: 18 Oct 2009
Location: Henley On Thames
Posts: 268

Allan wrote:
Thanks for that, so that is the point of connection for the motion detector?

Allan

Yes the white plug is the connection for the central locking (the two larger wires) and the motion sensor the purple wire. it goes through the seat box and comes up just in front of the b pillar then routes up inside the pillar to the sensor.

Jason.

14th Nov 2012 3:14pm

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

Thanks for that, will have a play over the weekend.

Allan

14th Nov 2012 10:49pm

achuakh

Member Since: 12 Apr 2012
Location: Singapore
Posts: 158

On a 90, it runs up the a pillar. You should have a connector with 6 or 5 wires. 3 of which are for the motion sensor. That's white with black, black with brown and black I believe.. The other wires go to the interior light, front.
So if yours had the full works, there will be another 3 wire from this connector to the motion sensor. Mine is a farmer spec 90 with no alarm, so I had to find all the wires, make some looms, crack open the 10as to solder the cdl relay, install the motion sensor, bonnet switch with bracket, ignition transponder coil and program the thing. From the land of the most expensive land rover defenders on planet earth. At ï¿½125k for a XS 110 csw and you get to own it only for 10yrs! Please find me a good reason to stay on this island.

16th Nov 2012 4:42pm

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

Thanks all.

Allan

17th Nov 2012 12:10am

Lorryman100

Member Since: 01 Oct 2010
Location: Here
Posts: 2686

What alarm unit is it, is it the Lucas 10AS or an after market unit?

17th Nov 2012 10:29am

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

Just the standard unit but in Australia none of the Defenders seem to have had the motion detector fitted. Our 90 or our now gone 110 S.V.X. did not have them fitted but my long gone Disco 1 did.

Allan

18th Nov 2012 12:22am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum