↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Defender 2.2 Tuning/Remap from IRB developments! - UPDATE!!
Post Reply  Down to end
Page 2 of 8 <12345678>
Print this entire topic · 
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

United Kingdom 
Porny wrote:
I'm not releasing all the figures - but the new ST1 calibration makes a genuine 59Nm at the wheels over the standard LR Calibration.

What does the standard calibration give at the wheels, Ian? Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #172892 3rd Oct 2012 9:04am
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807

England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Hi Ian,

Nice work, looking forward to the final tune Thumbs Up

Do you have the graph with figs on i.e. revs, bhp and torque along the top and up the sides, as it would be interesting to see what the figs are for the std vehicle, see if its anywhere near what LR quote - 122bhp and 360Nm of torque Whistle Whistle Whistle Gas, Grass Or Ass - Nobody Rides For Free

"UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.
Post #172908 3rd Oct 2012 10:09am
View user's profile Send private message View poster's gallery Reply with quote
Defender-Stu



Member Since: 14 Jun 2012
Location: South West England
Posts: 1320

United Kingdom 
I thought the STD tune was 120 and 265?
Post #172910 3rd Oct 2012 10:24am
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807

England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Taken off LR website and I quote

"Defender’s new 2.2 litre Diesel engine produces an impressive 360Nm of torque. With 90 percent of peak power constantly on tap from as low as 2,200rpm to over 4,350rpm, it provides maximum muscle for tough working environments."

Trying to find the bhp out now Thumbs Up Gas, Grass Or Ass - Nobody Rides For Free

"UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.
Post #172911 3rd Oct 2012 10:26am
View user's profile Send private message View poster's gallery Reply with quote
Defender-Stu



Member Since: 14 Jun 2012
Location: South West England
Posts: 1320

United Kingdom 
Thumbs Up
Post #172915 3rd Oct 2012 10:31am
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807

England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Been allover LR website and can't find a bhp fig anywhere but believe it to be 122bhp Thumbs Up

No doubt someone will correct me if I am wrong Exclamation Gas, Grass Or Ass - Nobody Rides For Free

"UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.
Post #172916 3rd Oct 2012 10:32am
View user's profile Send private message View poster's gallery Reply with quote
JeremyJ



Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758

United Kingdom 
Does this help?


Click image to enlarge
Post #172917 3rd Oct 2012 10:40am
View user's profile Send private message View poster's gallery Reply with quote
Japseroony



Member Since: 02 Jan 2008
Location: North East England
Posts: 807

England 2016 Defender 110 Puma 2.2 XS CSW Montalcino Red
Thanks for clearing that up Jeremy.

According to an app on my iphone that means 90Nm = 120.692hp (I think that is the same as bhp) so I was nearly correct Thumbs Up Gas, Grass Or Ass - Nobody Rides For Free

"UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.
Post #172919 3rd Oct 2012 10:45am
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

 
Yes, Land Rover claim 120bhp and 360Nm, however this will be done under test conditions and on an engine dyno - so not in vehicle.

What did I find with a standard 2.2... at wheels:
(so actual power transmitted to the road after all transmissions losses - which are typically 25% on a 4WD vehicle).

Standard 2.2 Defender made 95 bhp at the wheels, and 180lbft (244Nm) in 4th gear - bearing in mind each gear has different mapping, different torque limits etc.



Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #172932 3rd Oct 2012 12:02pm
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

 
More work going on today!!

Fingers crossed we can finish the new calibration prior to field trials and do the final tests on speed limiter removal.

Very Happy


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #173139 4th Oct 2012 10:58am
View user's profile Send private message View poster's gallery Reply with quote
vito115



Member Since: 29 Aug 2012
Location: kent
Posts: 29

What differences makes the engine 155 horse in the Transit ?
Post #173184 4th Oct 2012 5:43pm
View user's profile Send private message View poster's gallery Reply with quote
Schw8te



Member Since: 03 Jun 2012
Location: NRW
Posts: 27

Germany 2013 Defender 90 Puma 2.2 SW Santorini Black
Ian
The torque looks beautiful! Bow down

I want one!!

Det

Porny wrote:
We spent some more time on the dyno yesterday....

See below power curve.


The top curves are torque, the lower curves are power.


Ian
 locker bleiben
Post #173291 5th Oct 2012 6:31am
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

 
vito115 wrote:
What differences makes the engine 155 horse in the Transit ?


Engine calibration and Air Path differences...

The Transit on makes 385Nm - we are getting more than that Wink

The Power Generator in a diesl engine is Air not fuel. The issue with Diesels is not how much fuel you can inject, but how well the engine can breath throughout it Rev-Range.


Once we move onto stage 2 (which involves minor component/install changes), we will be making quite a bit more!



Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316


Last edited by Porny on 8th Oct 2012 6:42am. Edited 1 time in total
Post #173292 5th Oct 2012 6:57am
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

 
Schw8te wrote:
Ian
The torque looks beautiful! Bow down

I want one!!

Det



If you have a 2.2 you can.... although, after yesterdays development time, the torque curve will be moving in the right direction!


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #173293 5th Oct 2012 6:59am
View user's profile Send private message View poster's gallery Reply with quote
Porny
Site Sponsor


Member Since: 31 Aug 2009
Location: Sutton Coldfield - West Midlands
Posts: 809

 
Pm's replied to...

All being well, the specification STG1 Calibration will be done finalised this weekend....

So not long before it will be available to the general public.

This is not something I'm rushing - it needs to be 110% before it goes on sale.


Ian IRB
The home of the first modified Keswick Green 90 - and the first 2.4 Puma through both the 200bhp and 550Nm barriers.

www.IRBdevelopments.com

www.facebook.com/irbdevelopments

www.integrated316.com

www.facebook.com/integrated316
Post #174581 10th Oct 2012 12:08pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 8 <12345678>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums