Home > Off Topic > Charity ride starting 12 September |
|
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
I used it on my commuter and I'm reluctant to use it again as the valve never worked properly again?
anyway ignoring the damn weight of the ust tyres I think I've sussed it out.....the ust wheels didn't come with tubeless ready rim tape !!! so hopefully some proper tape and I'm sorted ! tubes and lighter tyres for reserve. |
||
7th Sep 2012 8:22am |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
just managed to upload the 'anti snake' device for trailer / caravan
- any donations ? |
||
10th Sep 2012 11:57am |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
Likeomg
mate. I've dug a great big hole for myself and need some help. !! bought some hope hoops for the ride and as these have crest ZTR rims I didn't realise they could be such a pig to fit tyres (my lack of knowledge as to what will and won't work with them has to say the least caused some issues). any how bottom line is I have the wheels and some Conti Xrace RS tyres but as of yet don't have the right rim tape (stans yellow 21mm tape or the valves) !! if I can't get sorted today anychance I could call in tomorrow pm for you to sort both in terms of selling the tape and valves and fitting of ? |
||
11th Sep 2012 6:19am |
|
AndyS Member Since: 18 Aug 2012 Location: London Posts: 595 |
Good luck for the ride, hope it all goes without issue. Let us know how it goes.
|
||
11th Sep 2012 5:37pm |
|
Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2640 |
hi, i run hope hoops but mine are the flow version and to be honest, i use a clear electricians tape almost as my rim tape, cheaper and as effective. if you cant get the tyres on, use a bit of soapy water, well use windshield washer fluid (which evaporates faster than plain water would) but im 99% sure they will have the stuff in stock as they normally do at whinlatter bikes, im now back on my cadetship at college studying so won't be around to help.. basically you only need the valve, electricians tape can even suffiace as rim tape, as long as it creates a seal my internet is highly limited so pm would be the best as it will email my iphone.. |
||
11th Sep 2012 6:41pm |
|
twopoint6khz Member Since: 18 Aug 2011 Location: North Lakes Posts: 654 |
Best of luck for the ride, I've just been to St Bees beach and it was hailing
|
||
11th Sep 2012 6:42pm |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
thanks guys.
generally its all going well (except the wheels / tyres !) need to get my hands on some valves now - will give the electrians tape a go but suspect I'll end up having to use my existing wheel set and perhaps change over one of the nights as it doesn't look like I'll get it sorted in time now thanks for the advice / support and sponsorship....... oh and did someone mention hail ! |
||
11th Sep 2012 7:58pm |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
guys - a huge thank you for your support.
only a very quick update (for now). completed the ride (and quite often walk with bike on back). got back late last night. some rather 'interesting' times, generally out for 12-13hrs (yes my bum is now rather painful). |
||
17th Sep 2012 1:01pm |
|
AndyS Member Since: 18 Aug 2012 Location: London Posts: 595 |
Top bombing young man, good stuff.
|
||
17th Sep 2012 6:57pm |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
just to let you all know we've having a get together this weekend to pull all the photos and videos together so will down load following that.
thanks again for the support shown. thank you. |
||
20th Sep 2012 10:47am |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6298 |
just a really big thank you to everyone who very kindly provide support for this great cause.....
Click image to enlarge |
||
21st Jan 2013 7:49pm |
|
GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381 |
Well done.
|
||
21st Jan 2013 9:49pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis