 | Home > Maintenance & Modifications > Brilliant upgrade for any Defender 110 / 130 |
 
|
|
|
| ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731   
|
Are you LHD?
One of the first things I did after getting the 110 and traveling through Italy is fabricate a nice solid cubby hole under the right hand seat box for small laptop, camera etc. There's loads of room under there, even leaving the ECU in place:  Click image to enlarge Brilliant thing is you absolutely cannot see there is anything there from outside 
Keep meaning to put a frame around it but I only ever notice it's there when I use it... and then forget :roll: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Tell someone you love them today because life is short.
But shout it at them in German because life is also terrifying and confusing... |
||
29th Jul 2012 9:29pm |
|
| SiWhite Member Since: 19 Jan 2010 Location: North Hampshire Posts: 455  
|
ZeDefender - that's great! Any chance of a pic from above without seat and plate in place? Would be interested in how much space that occupies. Not much room for jump leads etc in a 110 SW! My blog - www.anacreinhampshire.blogspot.co.uk
110 TD5 BuildHERE - sold! 110 Tdci Build HERE - sold! Passat Alltrack - 4x4, auto, 45mpg, gloriously comfortable - but not a Defender! |
||
|
29th Jul 2012 10:05pm |
|
| ti-fat-man Member Since: 08 Feb 2009 Location: Bedford Posts: 517 
|
Yeah I'm up for a parcel as well...
just emailed asking for a set with postage costs. when i get the passenger doors sorted, might prompt me to sort a rear door piston from Brendan for the poxy rear door...  |
||
|
29th Jul 2012 10:06pm |
|
| ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731
|
Sure - pics and dimensions tomorrow
I should warn you though, it's not pretty from the outside, as I was bored one evening and just sat down with a hammer, some beer and a riveter 
Someone should do a proper job  Tell someone you love them today because life is short.
But shout it at them in German because life is also terrifying and confusing... |
||
|
29th Jul 2012 10:09pm |
|
| ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731
|
Did the same earlier - they must think it's their lucky day...or night...whatever Tell someone you love them today because life is short.
But shout it at them in German because life is also terrifying and confusing... |
||
|
29th Jul 2012 10:10pm |
|
| ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731
|
Here are some pics. Sorry they're not very informative but the box is pretty much hidden (doesn't affect access to the fuses etc. though):
Click image to enlarge Click image to enlarge The measurements are: 33cm (13") deep 19cm (7 1/2") across 13cm (5") high 21cm 8 1/4") aperture diagonal Only issue is that my ECU isn't in the right hand seat box - probably should find it sometime... Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Tell someone you love them today because life is short.
But shout it at them in German because life is also terrifying and confusing... |
||
|
30th Jul 2012 11:45am |
|
| SiWhite Member Since: 19 Jan 2010 Location: North Hampshire Posts: 455
|
Brilliant - many thanks! Will be adding that to the list of must-have mods... My blog - www.anacreinhampshire.blogspot.co.uk
110 TD5 BuildHERE - sold! 110 Tdci Build HERE - sold! Passat Alltrack - 4x4, auto, 45mpg, gloriously comfortable - but not a Defender! |
||
|
30th Jul 2012 11:54am |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101  
|
mines bolted to the bulkhead so i can't see that being moved! |
||
|
30th Jul 2012 12:03pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
So, no pics of the subject of the OP yet then? Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
30th Jul 2012 3:12pm |
|
| AlpenAndes Member Since: 20 May 2011 Location: Currently Chile Posts: 128  
|
What about a group buy of the door adjustments to safe on postage?
|
||
|
31st Jul 2012 5:05am |
|
| AlpenAndes Member Since: 20 May 2011 Location: Currently Chile Posts: 128
|
Well, with postage it gets to 33AUD, 27 Euros they say.
Here two DIY solutions with no effort to get the doors to open 90°. Sorry, in German, but the pics explain. http://www.blacklandy.de/blboard/forum/sho...ostcount=4 http://www.my-landrover.de/My-Landrover.de/Turen.html |
||
|
31st Jul 2012 11:06am |
|
| quentin Member Since: 23 Jul 2012 Location: on tour Posts: 119  
|
Nice,
thanks for the links. you need to be a member to see the images in the first link. the second can be seen in english with this. great stuff http://translate.google.com.au/translate?s...mp;act=url |
||
|
31st Jul 2012 12:38pm |
|
| ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731
|
Ordered mine from the land of Oz today - only 30 something Euros. I'm hoping they don't require drilling into the floor panel - probably should have asked
Am now  off I forgot my blacklandy login and can't seem to retrieve it  Tell someone you love them today because life is short.
But shout it at them in German because life is also terrifying and confusing... |
||
|
31st Jul 2012 1:39pm |
|
| Go Beyond Member Since: 30 Jan 2012 Location: Headcorn, Kent Posts: 6677
|
Am I missing something here ?
You guys are prepared to pay over £20 for a couple of bolts ???? Don't forget to extend the door locking / window power cables .....
Is Dirtpod, Daniel by any chance  |
||
|
31st Jul 2012 2:32pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
