Home > Maintenance & Modifications > Legal tread depth! |
|
|
kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987 |
only 1.0mm on buses and hgv
conti's start at 10mm |
||
4th Feb 2012 10:55pm |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
From the first service the dealer said I had 11-12mm on my Continentals Looks like their tyre gauge is a tad out
Last edited by Zagato on 4th Feb 2012 11:02pm. Edited 1 time in total |
||
4th Feb 2012 10:59pm |
|
kingofthesparks Member Since: 06 Jan 2011 Location: Very close to Watford gap services , northants Posts: 987 |
Measured mine new and they were 10mm with a proper tyre guage even though pdi says 12mm
|
||
4th Feb 2012 11:02pm |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
I'll measure them tomorrow and see what they come out at
|
||
4th Feb 2012 11:03pm |
|
AlpsLandy Member Since: 11 Jan 2012 Location: Alps Posts: 116 |
Morning Zagato, any snow? Just checked my Conti CC's with a tread depth gauge 13mm all round. They've done about 900 miles so just about new. 2011 Defender 90 SW
2006 Discovery 3 HSE |
||
5th Feb 2012 7:25am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
Morning Alpy, yeah snow
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
5th Feb 2012 9:59am |
|
AlpsLandy Member Since: 11 Jan 2012 Location: Alps Posts: 116 |
Cooooolllll 2011 Defender 90 SW
2006 Discovery 3 HSE |
||
5th Feb 2012 10:12am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
Can't find my tyre gauge Looks as though they are at least 12mm new though
|
||
5th Feb 2012 10:19am |
|
AlpsLandy Member Since: 11 Jan 2012 Location: Alps Posts: 116 |
Conti CC's? 2011 Defender 90 SW
2006 Discovery 3 HSE |
||
5th Feb 2012 10:34am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
|||
5th Feb 2012 10:38am |
|
RED-DOT Member Since: 29 Jun 2009 Location: stirling Posts: 2363 |
Are you panicking already Zag?? Only 10mm to go. 2008 RS4 gone, 123d M Sport, and a Puma 90 XS..
|
||
5th Feb 2012 10:43am |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20343 |
To my mind 1.6mm is dangerously low still. seeing as a lot of people will leave there tyre's to get down to that which is hardly anything. I Know when I had the Grabbers with 7mm tread rather than 10 - 12mm there was a marked difference in traction when stopping. Came across a FWD car not being able to get up a snowy hill yesterday needless to say hardly any tyre tread. Which caused me to stop on said hill no room to get past and ended up sliding back
|
||
5th Feb 2012 11:17am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
..... Was just looking at the ones for sale with 7mm on them and wondering what they start off with and what the minumum is. Sound to be 2/3 rds worn going by what is being said here! |
||
5th Feb 2012 11:22am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013 |
Especailly when it's something like 75% at 1.6mm only |
||
5th Feb 2012 11:24am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis