DEFENDER2.NET - View topic - Replacement Axles

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Replacement Axles

Page 1 of 1

Print this entire topic ·

B1_D130

Member Since: 15 May 2022
Location: Scotland
Posts: 12

2005 Defender 130 Td5 HCPU Chawton White

Replacement Axles

Hi all,

A question, if I may.

I have a 300tdi 90 that I have decided to sell, as I am not using it. (And I have plenty other projects on the go)
However.. (Isnt there always a however with landrovers!!) The chassis is shot and it is currently sat on a set of Volvo portal axles. I think I will keep the axles, as I might put them under a different project.

The 90 was my off roader, she was well cared for, but life and family has meant its been laid up for a long time.
I have a nice new galv chassis for the 90, and I intend to rebuild it onto the new chassis before I sell it.

So, I need a set of replacement 300tdi axles to go under the 90. I have had a look about and it appears to be silly money for axles that do not look in good condition.
I have been offered a set of 300 tdi discovery axles for a couple of beer tokens, but they have been badly stored and will need a rebuild, which I am happy to do.

Is there any major differences between the defender and discovery axles? If I am replacing all the components, can I order defender stub axles etc and fit them to the discovery tubes?
The rear diff nose is different, being a 3 bolt flange, but that is easily changed. The front will need the steering bits moved about, but other than that, I cannot see much else. The donor discovery was a 1997 vehicle and the 90 is a 1998. Neither vehicle had ABS, so I think it should be a straight swap?

Any insight would be greatly appreciated before I embark on yet another project.

21st Jan 2025 12:49pm

fogbank

Member Since: 30 May 2024
Location: Daylight Savings
Posts: 8

How much would you be after for the truck as it is? I'm looking for a 300TDI as a project as I already have some of the parts that would be needed.

I'm based near Livingston

21st Jan 2025 2:56pm

B1_D130

Member Since: 15 May 2022
Location: Scotland
Posts: 12

Sent you a PM.
Cheers
Lee

21st Jan 2025 3:31pm

fogbank

Member Since: 30 May 2024
Location: Daylight Savings
Posts: 8

Replied

21st Jan 2025 8:15pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum