↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Need help! — Puma Crew Cab Transfer Mount Issue
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
yeco



Member Since: 25 Apr 2023
Location: Costa Rica
Posts: 7
Costa Rica 2008 Defender 110 Puma 2.4 DCPU Cairns Blue
Need help! — Puma Crew Cab Transfer Mount Issue
Hi all,

I’m having an issue with the transfer mount on my 2008 Land Rover Defender Puma crew cab (DCPU). The original mounting bracket was stolen, so unfortunately, I don’t have it as a reference. I recently got a new mount plate and support, but when I tried to fit them, I noticed there’s a huge gap.

Here’s a video that shows the problem: https://share.icloud.com/photos/011C6H62Xtltq5fvigFpWCYvA

Some pics:


Click image to enlarge



Click image to enlarge


I’m wondering if this could be due to a difference in mounting plates between the crew cab (DCPU) and the station wagon models. Does anyone know if the DCPU uses a different mounting plate compared to the station wagon, or if there might be another explanation for the gap?

Any help, advice, or experience with this issue would be greatly appreciated!

Thanks in advance.
Post #1046707 25th Sep 2024 12:48am
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5614
2006 Defender 110 Td5 USW Zermatt Silver
Are you changing both mounts?

KQB500550 RH SIDE

KQB500560 LH SIDE



Click image to enlarge

I don’t think the dcpu will have any difference with other models.

Last edited by landy andy on 25th Sep 2024 8:48am. Edited 1 time in total
Post #1046715 25th Sep 2024 8:40am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17285
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Re: Need help! — Puma Crew Cab Transfer Mount Issue
yeco wrote:
... I’m wondering if this could be due to a difference in mounting plates between the crew cab (DCPU) and the station wagon models. Does anyone know if the DCPU uses a different mounting plate compared to the station wagon, or if there might be another explanation for the gap?

...


There is no difference between the different variants, and every Puma Defender should have the same mounts.

Offhand I can't explain the gap, but I am sorry to hear that it was stolen. What an odd thing to steal!
Post #1046716 25th Sep 2024 8:46am
View user's profile Send private message View poster's gallery Reply with quote
yeco



Member Since: 25 Apr 2023
Location: Costa Rica
Posts: 7
Costa Rica 2008 Defender 110 Puma 2.4 DCPU Cairns Blue
landy andy wrote:
Are you changing both mounts?

KQB500550 RH SIDE

KQB500560 LH SIDE



Click image to enlarge

I don’t think the dcpu will have any difference with other models.


No, just sourced the bracket used and it came with the mount, which seems in good condition.
Post #1046726 25th Sep 2024 9:37am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3385
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Very strange. Dont think you can get the mounts swapped left to right because of an orientation dowel.

I doubt if the pics in the below thread can shed any light.

https://www.defender2.net/forum/post865316.html 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #1046732 25th Sep 2024 10:23am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3385
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
I am not with my Defender to check, but if I look at the mounts for sale on this ebay link, it seems like you have the wrong bracket.

https://www.ebay.co.uk/itm/296512338761?_s...SwOk5mcafV 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #1046751 25th Sep 2024 12:46pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17285
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
I agree with Dinnu, the bracket you have been supplied with is not the correct bracket for a Puma.

I think you've been supplied with ANR2898, you should have been supplied with KQE500050 which looks like this.

Note the relative positions of the holes to mount to the transfer box and the holes for the resilient mount, they are quite different to yours.
Post #1046759 25th Sep 2024 1:22pm
View user's profile Send private message View poster's gallery Reply with quote
yeco



Member Since: 25 Apr 2023
Location: Costa Rica
Posts: 7
Costa Rica 2008 Defender 110 Puma 2.4 DCPU Cairns Blue
Oh my. Seems like you’re right folks! It’s the flipping wrong bracket. Thank you so much for noticing!


The mount is the same, right?
Post #1046770 25th Sep 2024 2:36pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17285
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Yes, I believe that the mount is the same, just the bracket is different.
Post #1046771 25th Sep 2024 2:39pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums