DEFENDER2.NET - View topic - Brake light not responsive

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Brake light not responsive

Page 1 of 1

Print this entire topic ·

robbo22

Member Since: 21 Oct 2023
Location: Leistershire
Posts: 23

2009 Defender 110 Puma 2.4 HT Keswick Green

Brake light not responsive

Hi all,

My brake light isn’t responding when i brake. The light it self is working as they light up when dim and full beam are activated. Ive check the earth point on the RHS of the transfer box, that is in order.

Any help would be much appreciated

10th Aug 2024 6:54pm

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5700

2006 Defender 110 Td5 USW Zermatt Silver

Have you checked the switch on the brake pedal, and obviously the fuses.

11th Aug 2024 4:24am

jbcollier

Member Since: 29 Apr 2024
Location: Edmonton AB
Posts: 89

2009 Defender 110 Puma 2.4 SW Alpine White

There are two filaments in the bulb.

11th Aug 2024 12:33pm

robbo22

Member Since: 21 Oct 2023
Location: Leistershire
Posts: 23

Thank you, filaments are both ok, fuses and ok so it much be the switch? New one on order

11th Aug 2024 3:55pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17382

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Have you checked CJB Fuse 13?

Remember also that there are two switches associated with the brake pedal, only one of which operates the brake lights. Make sure if you do change a switch that you change the right one.

You might find it worth reading this thread which demystifies - slightly - the strange wiring associated with the 2.4 Puma brake lights.

Last edited by blackwolf on 11th Aug 2024 4:21pm. Edited 1 time in total

11th Aug 2024 4:18pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20365

Switch or grounding probably, try a new switch, test the live and ground.

$W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

11th Aug 2024 4:18pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17382

Unlikely to be a ground problem since the tail lights apparently work correctly.

11th Aug 2024 4:22pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20365

I’m not surprised switches do wear considering the amount of use they get, same with the clutch switch as well.
Considering that they tend to last quite a long time, I’ve not had to replace the brake switch (yet), but just one clutch switch. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

11th Aug 2024 5:11pm

robbo22

Member Since: 21 Oct 2023
Location: Leistershire
Posts: 23

FIXED. Brake switch(right hand side) replaced with genuine LR. The one i took of was a aftermarket one. I think the original was replaced 2 years ago - going on the MOT report of brake lamp failure

19th Aug 2024 8:39pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum