![]() | Home > Technical > window winders, handles |
![]() ![]() |
|
|
falkster Member Since: 12 Nov 2023 Location: Sutton Coldfield Posts: 68 ![]() ![]() ![]() |
hi all,
i ordered window winders (the handles, not the actual regulators) for my OneTen's second row seats as they had the blanking plates fitted by a previous owner, presumably in preparation for electric windows (which I have in the front row). After removing the covers, the mechanism that should take the winders look different to what I would have expected as it missing the hexagonal bit that takes the original winders. Instead the centre piece has flat bits to either side and a bolt hole in the middle. The original window winders won't fit... ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Is there a part missing? do I need different winders altogether? if so, which ones? What is the best way out of this (other than keeping the windows permanently shut)?? ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
