↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Replacing standard front bumper- which to go for?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
glpinxit



Member Since: 31 Jul 2010
Location: rural Somerset
Posts: 156
United Kingdom 
Replacing standard front bumper- which to go for?
The rust on the [standard] front bumper on my 2014 XS has reached the stage where I'm planning to replace it. I want one that still looks standard but doesn't suffer as badly once the coating has been blasted by the front wheels (and I'm not in the market for the front shield from Mr Lewis). I need one with holes for the end caps but that doesn't seem to reduce the available range.
I'd originally planned to buy a galvanised bumper and spray it satin black. But now I've seen Craddocks do a 'powder coated over zinc' bumper (DPB501190PMAV). Has anyone any feedback on this? (Or advice that doesn't suggest repainting the existing one.) Cheers, Guy.
Post #1033018 27th Apr 2024 8:22am
View user's profile Send private message View poster's gallery Reply with quote
Zed



Member Since: 07 Oct 2017
Location: In the woods
Posts: 3311
United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Santorini Black
Stainless from Uproar4x4.
https://uproar4x4.com/collections/stainless-steel-front-bumpers WARNING.
This post may contain sarcasm.
Post #1033019 27th Apr 2024 8:25am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3421
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Quote:
Powder Coated Over Zinc Phosphate Undercoat Over Zinc Passivate


It is an improvement over the original Land Rover bumper painting process, however if you want better, stick to your original plan, buy a britpart galvanized bumper - it is remarkably good, and then paint it with your choice of paint. Just remember that zinc needs a bit of more preparation. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #1033020 27th Apr 2024 8:38am
View user's profile Send private message View poster's gallery Reply with quote
Linds Hanson



Member Since: 16 Jan 2021
Location: Cornwall
Posts: 486
United Kingdom 
Uproar
Post #1033029 27th Apr 2024 9:29am
View user's profile Send private message View poster's gallery Reply with quote
Birdy



Member Since: 07 Oct 2011
Location: Côte d'Azur
Posts: 866
France 2011 Defender 110 Puma 2.4 XS CSW Santorini Black
The current one lasted ten years? Stainless costs hundreds (and equally likely to be accidentally damaged)?

Buy the cheapest possible, paint it black if not already, replace it as and when, and think of the front bumper as a "consumable".

Peter
Post #1033032 27th Apr 2024 9:51am
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410
United Kingdom 
Re: Replacing standard front bumper- which to go for?
glpinxit wrote:
(and I'm not in the market for the front shield from Mr Lewis).


Well Yikes, sounds like a Giggle of a back story there Rolling Eyes
Post #1033036 27th Apr 2024 10:07am
View user's profile Send private message View poster's gallery Reply with quote
julian



Member Since: 17 Feb 2017
Location: Devon
Posts: 122
United Kingdom 1994 Defender 110 300 Tdi CSW Alpine White
Id get a galvanized one and paint it.

Bumpers take abuse from all sorts - not only actual landrover use, but also people in car parks etc.

You can't touch up a powdercoated unit. You can a painted one.


Powder over non galvanized is a very temporary solution too. One stone chip and the water gets in behind and delaminates the powder over time.
Post #1033037 27th Apr 2024 10:21am
View user's profile Send private message View poster's gallery Reply with quote
Ianh



Member Since: 17 Sep 2018
Location: Essex
Posts: 2029
United Kingdom 
I bought a Black powered coated quad DRL bumper from Manor automotive. They also do a twin DRL and a plain NO DRL bumper. The plain one is £240.

https://manorautomotive.co.uk/products/lan...eel-bumper

I checked with them and they stated it was 316, not 304 grade stainless steel. So extremely resistant to corrosion. The steel is 2.5mm thick and the bumper has holes for end caps.

Like others I’m not a fan of powder coating, however if stone chips do happen then the 316 should not corrode and blow the powder coating. Time will tell if I’m correct.

Before fitting I sprayed the back, insides, and bottom of the bumper with Bilt Hamber Dynax UB wax for added protection.

Then used Bilt Hamber double speed wax on the front and top to protect the visible black powder coat.

To refurbish the rubber end caps I gave them a good clean with Meguiars APC, diluted 1 part APC to 10 parts water. Then coated with car plan black trim wax. An old school product but works really well on End caps, mud flaps etc. The end caps looked brand new after this.
Post #1033049 27th Apr 2024 2:41pm
View user's profile Send private message View poster's gallery Reply with quote
LR90XS2011



Member Since: 05 Apr 2011
Location: bickenhill
Posts: 3643
United Kingdom 2011 Defender 90 Puma 2.4 XS CSW Galway Green
Try Wildbear.

Not as good fit as original but surprisingly good price for standard style in stainless.

Don't buy if you have standard rubber A bar and don't like tweaking things to make them fit, the Wildbear one sits about 8mm further forward so A bar brackets wont fit.

https://wildbear4x4.com/collections/defender?page=6 DEFENDER 90 TDCI XS,

I hope everyone is well and your land rovers make you happy
Post #1033072 27th Apr 2024 6:13pm
View user's profile Send private message View poster's gallery Reply with quote
strang



Member Since: 16 May 2012
Location: Happy Valley
Posts: 1381
United Kingdom 2009 Defender 90 Puma 2.4 XS CSW Galway Green
I'm on my 4th bumper and went for galvanized this time. I actually like the look as opposed to painted.


Click image to enlarge Euro-Leafing to infinity and beyond.....
Post #1033290 29th Apr 2024 5:53pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20443
United Kingdom 
I think that suits yours, it looks just right with the grill and headlight sounds colour matched. No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #1033335 29th Apr 2024 10:00pm
View user's profile Send private message View poster's gallery Reply with quote
glpinxit



Member Since: 31 Jul 2010
Location: rural Somerset
Posts: 156
United Kingdom 
Thanks for all the comments and suggestions.
I've decided to go with galvanised (I found a 3mm version at a reasonable price- apparently standard is 2.5mm). I'll see if I can get it powder coated locally. And contrary to what I originally said, reading more carefully it looks like fitting the front wing mud shields won't involve drilling so I'll get some https://gwynlewis4x4.co.uk/product/gl1022-...d-shields/ (I already have others elsewhere) Cheers, Guy.
Post #1033406 30th Apr 2024 3:13pm
View user's profile Send private message View poster's gallery Reply with quote
BrunoJ



Member Since: 14 Sep 2019
Location: Stavanger
Posts: 75
Norway 2012 Defender 110 Puma 2.2 SW Keswick Green
I was in similar situation with front bumper (as well as roof rack) but decided to give them another chance. So cleaned and repainted. Checking closely you can see some places are not ideally flat like from the factory, but overall good result. That was combined with bigger de-rusting service (frame protection, replacing bolts etc). I had to replace side bars/steps, it was too late to try to restore them.
I'm not sure this bumper will survive another 10 year, but after one year I do not see any issues.
I'm not sure it that matters, I have a winch installed, so potentially not all 3rd party bumpers will fit in my case.
Post #1033417 30th Apr 2024 4:51pm
View user's profile Send private message View poster's gallery Reply with quote
strang



Member Since: 16 May 2012
Location: Happy Valley
Posts: 1381
United Kingdom 2009 Defender 90 Puma 2.4 XS CSW Galway Green
custom90 wrote:
I think that suits yours, it looks just right with the grill and headlight sounds colour matched.


Thanks Thumbs Up Euro-Leafing to infinity and beyond.....
Post #1033426 30th Apr 2024 6:22pm
View user's profile Send private message View poster's gallery Reply with quote
Stacey007



Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3757
United Kingdom 
I needed one after around 8 years, managed to get another standard one and sprayed it gloss black.

total around £80


I was looking at the uproar ones a while back and a plain one I thought was around £300 shocked to just look now and a plain one is £550 and if you want lights £750 to £1200

They have shot up?

Just looked and a new basic black bumper £110 with end caps. I could flat this down and respray in gloss, buy 5 bumpers for the same price..


https://www.sp-4x4.com/product_p/jwp1084.htm


Don't get me wrong I like the uproar stuff but that's a lot for a std bumper...


without end caps even cheaper...

https://www.sp-4x4.com/defender_90_110_fro...104270.htm
Post #1033496 1st May 2024 9:58am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums