DEFENDER2.NET - View topic - Half-Door 110 Puma alarm activation issues.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Half-Door 110 Puma alarm activation issues.

Page 1 of 1

Print this entire topic ·

Freddie

Member Since: 21 May 2014
Location: Cape Town
Posts: 46

Half-Door 110 Puma alarm activation issues.

Hi Guys,

I've just converted a 2012 Land Rover Defender Puma 2.2 110 from a 5-door station wagon to a soft-top with half doors. The half-door conversion means there is no longer central locking and electric windows.

The issue I'm having is that when 'locking' the vehicle with the remote (to set the alarm), it hoots twice - much like a standard 110 station wagon would if one left a door open and pressed the lock button on the remote. I've checked all the courtesy switches on the door pillars, and they all work correctly; opening the doors results in the interior light coming on and the alarm going off when set.

I've disabled the horn activating when locking the car using a nanocom. However, I've noticed that the hazards don't blink - so it's tough to know whether the alarm has been set. But they do blink when the vehicle is unlocked, turning off the alarm.

Does anyone know how to force the hazards to flash when the vehicle is 'locked'?

I assume this is happening because the ECU recognised that the central locking isn't activating. When removing the doors, I just unclipped the electrical connectors on them, so the door cabling within the door pillars is still in place. So, I'm hoping there might be as simple as an open circuit that must be closed.

I'd really appreciate any suggestions!

Freddie

22nd Jan 2024 6:43am

Natlas

Member Since: 20 Mar 2013
Location: West Sussex
Posts: 460

2013 Defender 90 Puma 2.2 XS CSW Aintree Green

I have a similar problem. In my case a Puma 90. Just had a respray, so lots of panel and electrical disturbance but now when I press the fob to lock the car it locks and the horn alarm toots twice. The indicators do not flash. It unlocks from the fob ok.
I did notice a sleeved white wire hanging down by the drivers door hinge that has nowhere to go, perhaps it is the culprit but where should it go? Wiring diagram shows several white wires. The white wire could also be nothing to do with the problem.
Any help gratefully appreciated. Thanks. 2.2 90 XS
88" Series One
Old Norton

Minerva

10th Apr 2024 2:38pm

hank

Member Since: 12 Sep 2016
Location: South Wales
Posts: 2300

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

You could trick the ECU into thinking the central locking actuators are still there by adding a resistor between the two pins in the (now unplugged) connector. Not sure what ohmage it would need to be, you could measure the resistance across the removed actuators? > 110 XS Double Cab

10th Apr 2024 2:51pm

bankz5152

Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2166

Disconnect the door switches and try Instagram @defender_ventures
Empire Tuning - Agent

10th Apr 2024 6:01pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum