 | Home > Series Land Rovers > Half door seal |
 
|
|
|
| MarkBrown Member Since: 03 Oct 2022 Location: Mid Wales Posts: 475   
|
I can’t remember but I’d put some sealant around the door top bolts ( which I didn’t ) to stop them leaking from around the bolts ( which mine now do)
|
||
7th Apr 2024 11:51am |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 597  
|
So like this?
Lip to outside and pointing down over edge of door  Click image to enlarge Click image to enlarge |
||
|
7th Apr 2024 11:57am |
|
| Devon-Rover Member Since: 22 Jan 2015 Location: South Devon Posts: 917 
|
I've always done it flat side down, and the lip on the outer edge.
FWIW  Also can be found on Fb, Ytube, Insta & Twitter @4WDSouthwest |
||
|
7th Apr 2024 12:25pm |
|
| Bowbearer Member Since: 12 Aug 2022 Location: Norfolk Posts: 178 
|
No that’s the obvious way. It’s a Land Rover.
I thought it was that way round. Recent trip to Dunsfold LR and looked at their series doors. Lip on inside facing down. This is because on the outside you have 2 drain holes for the window channel. If you have the lip on the outside it blocks them. |
||
|
4th May 2024 2:01pm |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 597
|
Thanks for that, I'll give it go this weekend.
|
||
|
5th May 2024 12:36am |
|
| Bowbearer Member Since: 12 Aug 2022 Location: Norfolk Posts: 178
|
Careful not to overtighten the bolts
They are only held in with a sot weld. Found out the hard way! |
||
|
5th May 2024 8:34am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
