DEFENDER2.NET - View topic - Defender TD5 Rear washer pump wiring

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Defender TD5 Rear washer pump wiring

Page 1 of 1

Print this entire topic ·

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Defender TD5 Rear washer pump wiring

Hello everyone,

I'm sorry to post this as a separate topic, as i tried before in a less specific sense. I had some great help and advice, but haven't solved the final bit yet.

I am fitting a rear wash system (complete from scratch because it wasn't specified / fitted from factory). The rear door wiring loom has been purchased and trial fitted, along with wiper motor, arm, blade, pipe, jet etc etc. At the dash, the switch has been purchased and the connector for it was already there in the dash, plugged into a dummy switch. All good.

I have had a look at the reservoir bottle end and confirm there is no pump (now purchased) nor wiring loom / connector (that i can see) unless it's pretty well hidden.

My question is whether the wiring from the dash switch connector does make it's way through the bulkhead and is sat there on nearside / front somewhere? I am going to take off the dash top (maybe lower dash also) to have a look and see if I can trace the wiring. Just before I do that, has anyone done this before that can confirm whether the loom is there and or where it might be?

Thanks for looking.

Click image to enlarge

Defender 90 TD5 Hardtop 2004

22nd Mar 2024 1:48pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 620

2007 Defender 90 Puma 2.4 HT Aintree Green

Did this many years ago on a 2005 90 hardtop that was quite bizarrely factory fitted with full aircon system but no rear wash wipe system or heated rear screen! I seem to remember the washer loom plugged in to the main loom and I may have had to obtain a washer loom with twin plugs, however this was probably fifteen years ago!

23rd Mar 2024 3:48am

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Wow, A/C but no rear wiper or heated screen. I thought mine was a bit strange with aftermarket electric windows and heated electric seats with no rear wiper etc!!

I haven’t been able to find the loom itself yet, will have another go with more enthusiasm now 😊👍

Is there a large main loom connector lurking behind the dash or somewhere (to receive the rear wash look).

Thanks for the reply 👍

23rd Mar 2024 9:15am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

The rear washer plug is on the LH (UK passenger side) wing loom, right next to the front pump connector.

Front pump is 2 pin red with light green/black and black wires (C0008 below), rear pump is same style connector but black housing with black/light green and black wires (C0021).

I believe all the wing looms have the rear washer pump connector on them, there are only two variants which are with/without BBUS and headlamp levelling.

Behind the headlight is the best access.

Click image to enlarge

1988 90 Td5 NAS soft top

2015 D90 XS SW

23rd Mar 2024 11:41am

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Fantastic, thanks Martin. I’ll probably remove the reservoir anyway, so should be able to find it. 👍

23rd Mar 2024 1:14pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1624

Matty if Martin doesn’t, PaulMc if you look him up has made me looms up before, beautiful work, fairly priced and easy to install.

The reservoir can be a bear to get the screw headed bolts out of, go in through the headlight like in the picture

23rd Mar 2024 5:57pm

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Many thanks Nick.

I’m hoping the loom will be there, but I know where to go now if not 👍

23rd Mar 2024 7:57pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

oh ok

1988 90 Td5 NAS soft top

2015 D90 XS SW

23rd Mar 2024 8:23pm

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

110Matty wrote:
Fantastic, thanks Martin. I’ll probably remove the reservoir anyway, so should be able to find it. 👍

Hi Martin, found it (I think). Thanks for your replies and knowledge. Do I take it that you do looms if needed?

Click image to enlarge

24th Mar 2024 5:17pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

Correct connector but wrong wire colours. That’s the alarm sounder connector.

Edit: yes I can and do make up looms

1988 90 Td5 NAS soft top

2015 D90 XS SW

24th Mar 2024 6:10pm

Procta

Member Since: 03 Dec 2016
Location: Sunderland
Posts: 5161

martin do you still do the rear wiper loom, that works with the front wipers? We chatted about it some time ago. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

27th Mar 2024 1:25am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

If you mean the little controller which runs the rear on a delay, and in sync with the front, then yes I can still do those

1988 90 Td5 NAS soft top

2015 D90 XS SW

27th Mar 2024 7:24am

Procta

Member Since: 03 Dec 2016
Location: Sunderland
Posts: 5161

brill martin, where can i get one? i am in back in the market to start throwing upgrades at this.

Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

1st Apr 2024 1:17am

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Martin wrote:
Correct connector but wrong wire colours. That’s the alarm sounder connector.

Edit: yes I can and do make up looms

Hi Martin, I'm hoping to get back onto this, this weekend if I don't take off in the Storm!

Interestingly, my alarm still sounds even though i didn't replace this plug anywhere, it felt like it was loose when i discovered it, but it could well have come off from wherever it was attached I suppose.

Should the alarm still sound if this connector is loose as it is?

5th Apr 2024 12:34pm

110Matty

Member Since: 20 Apr 2023
Location: Somerset
Posts: 129

Martin wrote:
Correct connector but wrong wire colours. That’s the alarm sounder connector.

Edit: yes I can and do make up looms

Found the rear wash pump connector today Martin, it was tucked away. Rear pump installed and working nicely. Cheers for guidance.

14th Apr 2024 10:58pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum