DEFENDER2.NET - View topic - Stainless Steel Tub Cappings (90 with no bulkhead)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Group Buys > Stainless Steel Tub Cappings (90 with no bulkhead)

Page 1 of 1

Print this entire topic ·

Blue Blood

Member Since: 14 Jun 2022
Location: Shropshire
Posts: 119

1990 Defender 90 200 Tdi HT Bonatti Grey

Stainless Steel Tub Cappings (90 with no bulkhead)

Hi All,

Only me (again) with another convoluted idea. I have been talking to some fabricators on the possibility of producing some cappings for a rear tub on a 90 (bulkhead free version).
I know what some maybe thinking…”that already exists", "what’s the point?”, “if it ain’t broke’, etc. However the main difference here is having them produced in Stainless Steel. The main benefit is that it would not rust, I know there are galvanised options out there but they don’t go very well with a sleek colour scheme plus they do have a tendency to still rust which definetly doesn’t go with a sleek colour scheme.

At this point I am just talking to the fabricator who is also a Landy nut (which always helps) and they’ve advised me that to have them produced there would have to be enough people interested in the first place, so this I guess is the first baby step to see if I am alone on this or if other people would be interested? I know a big part of this would be price dependent but at this stage I just wanted to see if there were people genuinley interested or if people think its just a stupid idea and that if it ain’t broke don’t fix it.

Just feel free to reply to this topic on your thoughts an feelings or potential interest.

Regards Blue

31st Jan 2024 12:42pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3414

2012 Defender 90 Puma 2.2 CSW Santorini Black

The only problem that I see is that stainless is further away from aluminum in the galvanic table. What that means is that when they are in contact, a greater potential is created, and the lesser noble material, in this case Aluminum will corrode more readily. Not something that I would like. This would be made worse when surface areas are large. Many Defender owners go into great lengths to isolate small SS bolts from the aluminum.

How about making them from aircraft grade, preferably extruded aluminum, and hard anodized for the ultimate corrosion resistance? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

31st Jan 2024 2:27pm

Linds Hanson

Member Since: 16 Jan 2021
Location: Cornwall
Posts: 485

I can't see how they can be accuratley reproduced without a significant investment in press tooling and said tooling wouldnt last very long working with stainless.

31st Jan 2024 3:45pm

Mdm

Member Since: 11 Sep 2013
Location: Sunny Lancashire
Posts: 1599

i dont see a market for them.

original painted/ galv ones are plentiful on the used market

aftermarket painted or galv plentiful for sale new as well

we already have steel and alloy corrosion why would you add another steel to the mix

31st Jan 2024 4:41pm

Blue Blood

Member Since: 14 Jun 2022
Location: Shropshire
Posts: 119

These are all good solid point. However I can’t help but wonder where the steel comes into contact with bare aluminium. The upper part has a foam seal on above and the tubs are painted. So other than bolts /rivets joining I am not sure where the interaction would be?
Also speaking to the fabricator I think he said the design might need to be slightly modified (I’m assuming he is talking about the bump).
But thanks everyone so far for feedback it’s good hearing peoples thoughts and opinions and knowing if there are any potential areas to consider/improve 😊

31st Jan 2024 6:13pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum